Results 1 to 13 of 13
Thread: 2007 Chevy 2500HD LOW MILES
Hybrid View
-
04-13-2011 #1
Registered User
- Join Date
- Mar 2008
- Location
- Janesville, WI
- Posts
- 566
2007 Chevy 2500HD Low Miles - Manual Trans
Sold
Last edited by subtlez28; 05-10-2011 at 07:35 PM. Reason: SOLD
-
04-22-2011 #2
Registered User
- Join Date
- Mar 2008
- Location
- Janesville, WI
- Posts
- 566
Any interest or offers?
If not, I will likely put this on e-bay next week.
04-22-2011 #3
Registered User
- Join Date
- Aug 2008
- Location
- Waco, Tx
- Posts
- 57
very clean, too bad it's gas.
04-26-2011 #4
Registered User
- Join Date
- Mar 2008
- Location
- Janesville, WI
- Posts
- 566
I can deliver this if it helps. I will drive it to you for gas $.
04-28-2011 #5
Registered User
- Join Date
- Oct 2007
- Location
- Fort Hood TX
- Posts
- 108
Take it to Carmax. They always give a little more than trade in if you just want to flat out sell it.
04-28-2011 #6
Registered User
- Join Date
- Mar 2008
- Location
- Janesville, WI
- Posts
- 566
Thanks. I'll look into that.
04-28-2011 #7
Registered User
- Join Date
- Mar 2011
- Location
- st. louis
- Posts
- 96
I wish I was in a position to buy right now, I need it! heres mine as of Monday
[/IMG]
04-28-2011 #8
Registered User
- Join Date
- Jan 2010
- Location
- Apopka
- Posts
- 109
What the heck happened?
Originally Posted by MARBIL
I wish I was in a position to buy right now, I need it! heres mine as of Monday
[/IMG]1980 Corvette in the works.
04-29-2011 #9
Registered User
- Join Date
- Aug 2004
- Location
- Rustburg, Virginia
- Posts
- 3,436
Yikes...was it electrical? Originally Posted by MARBIL
[/IMG]1970 RS/SS350 139K on the clock:
89 TPI motor w/ 1pc rear seal coupled to a Viper T56 via Mcleod's modular bellhousing w/ hydraulic T/O bearing from the Viper, 12 bolt rear w/ 3.73 gearing, SC&C upper control arms, factory lowers with Delalums, C5 brakes at all four corners, Front Wheels 17x8's with Sumi 255/40/17 and Rear Wheels 17x9's with Sumi 275/40/17.
Brief description of the work done so far can be found here: http://www.nastyz28.com/forum/showthread.php?t=112454
04-29-2011 #10
Full Blown G-Machiner
- Join Date
- Nov 2008
- Location
- Central Indiana
- Posts
- 723
Must have been, judging by the area most affected. Not what you want to look down and see while cruising at 60! Originally Posted by John Wright
04-28-2011 #11
Registered User
- Join Date
- Aug 2004
- Location
- Rustburg, Virginia
- Posts
- 3,436
Wonder if Trey is interested in this one?
1970 RS/SS350 139K on the clock:
89 TPI motor w/ 1pc rear seal coupled to a Viper T56 via Mcleod's modular bellhousing w/ hydraulic T/O bearing from the Viper, 12 bolt rear w/ 3.73 gearing, SC&C upper control arms, factory lowers with Delalums, C5 brakes at all four corners, Front Wheels 17x8's with Sumi 255/40/17 and Rear Wheels 17x9's with Sumi 275/40/17.
Brief description of the work done so far can be found here: http://www.nastyz28.com/forum/showthread.php?t=112454
04-28-2011 #12
Registered User
- Join Date
- Mar 2008
- Location
- Janesville, WI
- Posts
- 566
That sucks! Let me know if you have any interest once you get your insurance check. I would be willing to deliver to St Louis. Originally Posted by MARBIL
Thanks John. I sent Trey a PM. Originally Posted by John Wright
05-02-2011 #13
Registered User
- Join Date
- Mar 2008
- Location
- Janesville, WI
- Posts
- 566
Sold
Last edited by subtlez28; 05-10-2011 at 07:34 PM. Reason: SOLD
Reply With Quote
