Results 1 to 3 of 3
Thread: TCP Questions
-
04-12-2011 #1
Registered User
- Join Date
- Feb 2009
- Location
- Fort Stewart, GA
- Posts
- 6
TCP Questions
I have a 67 Mercury Cougar, and I've swapped in the Total Control Products 4 link suspension, and I was thinking, can a Torque Arm be added to that? Anyone know?
-
04-20-2011 #2
New to Pro-Touring
- Join Date
- Mar 2011
- Location
- Sacramento CA
- Posts
- 3
When using the g-bar or g-link canted 4-bar system the torque arm cannot be used. The upper link bars control the pinion rotation, just as the torque arm would. But, with the added benefit of being able to adjust the instant center position by moving the upper links to the different mounting holes that are available at the upper axle brackets and chassis mounts.
Jim @ Chassisworks/TCP
04-20-2011 #3
Registered User
- Join Date
- Apr 2009
- Location
- san diego
- Posts
- 5,101
you could remove the UCAs and put in the torque arm. I bet TCP would sell you the torque arms and SFC with mount. Just weld the mounts on to the housing.
My build thread: https://www.pro-touring.com/showthre...ing&highlight=
The mustang build thread: https://www.pro-touring.com/showthre...el)&highlight=
Reply With Quote
