Results 1 to 3 of 3
Hybrid View
-
03-25-2011 #1
Registered User
- Join Date
- Feb 2005
- Posts
- 100
camber and toe question - detroit speed question
Bought Detroit speed 67 camaro upper control arm set and front suspension kit about 5 years ago. I had to buy some new front tires because the toe was out of whack. They are asking me what specifications to use for the camber and toe. DSE is closed and they needed an answer back on this? Any ideas?
MY 67 Convertible
http://photobucket.com/albums/e143/jerebus67/?sc=1
-
03-25-2011 #2
Registered User
- Join Date
- Oct 2004
- Location
- NJ
- Posts
- 769
.5 degrees negative camber and as much caster as they can get as close to 4.5*, toe .10" total positive
03-26-2011 #3
Registered User
- Join Date
- Nov 2008
- Location
- So. Cal.
- Posts
- 1,240
Yeah... Thats a basic setup. Caster it out as much as possible. Camber is good at half a degree, and some toe in, as little as possible, just to make it toe in and not wobble between in and out. JR
What I write is opinion, none of it is factual. 2010
Even though I'm conscious it doesn't mean I'm coherent. 2011
I'm getting better with age. Best thing about old age is I don't know any better. 2012
Reply With Quote
