Results 1 to 6 of 6
Thread: subframe install
-
03-17-2011 #1
Registered User
- Join Date
- Dec 2010
- Location
- new plymouth idaho
- Posts
- 3
subframe install
I am working on a 67 camaro and got the subframe back from getting powder coated and all new parts installed. my question is when installing the subframe back in the car how and where do you measure to square up the subframe? any help would be greatly appreciated.
-
03-17-2011 #2
Registered User
- Join Date
- Jun 2009
- Location
- Piqua, Oh
- Posts
- 397
There are (2) 5/8" holes in the Sub-Frame Firewall mounts. There is a 5/8" hole in the drivers side body mount and a 5/8" Slot in passengers side Body mount. Use those holes to line each other up. It is pretty good place to start anyway.
Mike South
1968 Camaro SS/RS LS1/T56
Ride Tech Tru Turn, Ride Tech T/Q Coil-overs
Ride Tech 4-link
03-17-2011 #3
Registered User
- Join Date
- Dec 2009
- Posts
- 1,607
There is a GM diagram that will give you proper dimensions which you can use to cross reference against an 'X' measurement. Send me a PM and with your email and I'll get you the whole enchillada...
Ron in SoCal
69 Camaro in progress
http://www.lateral-g.net/forums/showthread.php4?t=31246
Used to be known as flash911
03-17-2011 #4
Registered User
- Join Date
- May 2002
- Location
- Northern California
- Posts
- 10,716
this one's good...
MrQuick ΜΟΛ'ΩΝ ΛΑΒ'Ε
03-19-2011 #5
Registered User
- Join Date
- Dec 2010
- Location
- new plymouth idaho
- Posts
- 3
Hey guys thanks for all the help! i am glad there is a site like this with a group of great people like all of you to help some one like me! i have built and modified alot of 4x4s but this is my first muscle car. again thanks and i appreciate all the help!!!!
03-23-2011 #6
Registered User
- Join Date
- Jan 2010
- Location
- Louisville, KY
- Posts
- 152
Thanks Vince, I needed that too
Reply With Quote
