Results 1 to 3 of 3
Thread: First Gen Pitman Arm Length
-
06-13-2005 #1
Starting The Transformation
- Join Date
- Nov 2002
- Posts
- 204
First Gen Pitman Arm Length
I know this has been discussed before. I did a quick search and found no specifics.
Were there two different length pitman arms? What would the measured distance be from center to center of the two arms? Any part numbers, years used or a link to a thread would be great.
Since a longer arm will provide a longer “throw” this in turn (no pun) would then give your vehicle a tighter turning radius providing that your not meeting the factory stops or hitting the a-arm stops already.
I’ve yet to look at what is on this latest project. The turning radius is awful`O~O> shirtless
-
06-13-2005 #2
Registered User
- Join Date
- Sep 2004
- Location
- Metamora, Illinois
- Posts
- 1,619
Check out David Pozzis website http://www.pozziracing.com/camaro_steering.htm#parts list It is a must read before doing ANY suspension work on a 1st gen.
06-13-2005 #3
Starting The Transformation
- Join Date
- Nov 2002
- Posts
- 204
And how did I forget...
Originally Posted by rocketrod
brain farts really do happen. Thanks`O~O> shirtless
Reply With Quote
