Results 1 to 6 of 6
Thread: Booster pin pre-load?
Threaded View
-
02-21-2011 #4
Registered User
- Join Date
- Jul 2006
- Location
- Pensacola, FL
- Posts
- 1,265
The booster pin has an o-ring on the end, trapping the air in and preloading the pin on the master. Can I remove the o-ring? I put the pin in the master, then slid on the booster plug & pushed it on until it bottomed. The preloadis enough to move the master piston before you overcome the preload, if that makes sense. Scott
-
Reply With Quote
