Results 1 to 10 of 10
  1. #1
    Join Date
    Aug 2010
    Location
    Los Angeles
    Posts
    716
    Country Flag: United States

    Looking for 700r4

    Hey guys,

    I know some of you have swap to bigger and better things but I was hoping someone has a 700r4 lying around. Looking to hook it up to a 350 sbc.



  2. #2
    Join Date
    Feb 2011
    Location
    Northern California
    Posts
    68
    Where are you located?
    I have a 700R4 but would probably want to have it gone through for any performance applications
    It came out of a running GM TBI truck.
    I'm located in Northern California.

  3. #3
    Join Date
    Aug 2010
    Location
    Los Angeles
    Posts
    716
    Country Flag: United States
    Yeah, I'm kinda looking for a good to go set up but thanks.

  4. #4
    Join Date
    Feb 2011
    Location
    Northern California
    Posts
    68
    No Problem, Good Luck!

  5. #5
    Join Date
    Oct 2005
    Location
    Toronto
    Posts
    1,469
    I have a professionally built 700R4 that is one season old (2,000ish miles I'd guess,, biggest trip was Toronto to Wisconsin Face off event and then local driving only ) in a street 1970 383ci Z28 clone with a good/brand name converter (so I was told by the Trans shop I can find out) that works great for street driving..... I'm changing the car over to a new 5 speed Keisler RS600 because I'm not into an auto on the street for daily driving,,,, it's just not my bag...

    I initially did the car with an auto thinking my youngest son couldn't drive standard,,,,, boy did he surprise me when he hoped in one of my other cars and starting driving a standard like he'd been doing it for years right off the hop.... $1,500 cash firm for the transmission and converter (will not separate) delivered to the El Toro field in California while I'm out at the event.....
    Carbon Kustoms Limited
    A.K.A. Albert from Toronto

  6. #6
    Join Date
    Aug 2010
    Location
    Los Angeles
    Posts
    716
    Country Flag: United States
    That's a bit too much. I can do very close to that brand new but thanks for the offer.

  7. #7
    Join Date
    Feb 2011
    Posts
    7
    have a nice 700R4 out of a 86 Iroc. Was on a tuned port motor

  8. #8
    Join Date
    Apr 2010
    Location
    Jersey Shore
    Posts
    629
    Country Flag: United States
    where are you located? I have a worked over 700 for sale:
    700r4 Trans...Professional rebuild by Ziggy's Transmissions in NJ less than 15,000 ago. Rebuild included:
    New seals, gaskets, teflon and o-rings
    New filter
    Hardened Transgo pump rings
    New .471 boost valve & sleeve
    Raybestos Pro Series 2-4 band
    Rabestos Heavy Duty 3--4 Z-Pak
    Shift Kit
    Hydraulic lock-up
    Corvette servo
    Corvette governor
    Hardened sun shell
    020 Valve & sleeve
    New BW rear roller set
    Heavy Duty 2500 stall speed converter

    Complete bolt in set-up includes
    168 tooth flexplate (came off of a 1pc rear seal block)
    trans/converter dust cover
    tv cable
    TCI custom tv cable brackets for correct cable operation with a Holley carb
    dipstick and tube
    Hurst ratchet shifter complete with cable, hardware, handle, ball and console
    yoke for a 700r4
    finned aluminum tube style trans cooler
    trans cooler hard lines for a tri-five chevy
    **Yoke and custom tv cable carb bracket are not pictured.

    This set-up has less than 15,000 miles on it.
    -Chris
    '69 Corvette
    '55 Chevy Hardtop
    AutoWorks Middletown, NJ
    @autoworksnj for corvette and shop car pics
    https://www.pro-touring.com/showthre...e-Build-Thread

  9. #9
    Join Date
    Aug 2010
    Location
    Los Angeles
    Posts
    716
    Country Flag: United States
    I actually found one. Thanks.

  10. #10
    Join Date
    Dec 2007
    Posts
    59
    I have one, never ran, with all the best stuff, including the beast shell. I'll let it go for a good price if you are looking for other options.

    Thanks,

    Jon