Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 20 of 296

    Threaded View

    1. #11
      Join Date
      May 2007
      Location
      Mooresville, Indiana
      Posts
      1,874
      Country Flag: United States
      Still trying to get caught up on the upgrades. Here are some pictures of the new Magnaflow exhaust system. As we were installing it we were really unhappy with how low it had to be due to the crossmember being so far from the floor of the car (stock). Like everything else, we were running out of time so I made the decision to just get it installed and we would make some modifications when we returned from SEMA/OUSCI and Scottsdale. Once we took the car off the blocks we realized that the exhaust was really tucked up pretty well. So, when we get home we will just replace the clamps that came with it with some Vibrant V-Band clamps and weld everything up. Bottom line, Deb drove the car on the highway from the speedway to the convention center and was thrilled with the way it purred with the new exhaust and how she wasn't dying of fumes like she was with the hole in the cargo area and the exhaust dumping out before the axle.

      Old and new.


      Dumps out just behind the tires.




      After the first test drive we realized that rubber clamps at the mufflers weren't going to be enough because with any kind of bumps in the road it was clunking. These additional "hard" clamps came with the kit also.




      The welding that we have done was done with MIG with stainless wire. TIG is in the future, but not yet...


      Side view shows the clearance.





    Advertise on Pro-Touring.com