Results 1 to 6 of 6
Thread: banjo fitting question
Hybrid View
-
01-31-2011 #1
Registered User
- Join Date
- Aug 2004
- Location
- Melbourne, FL
- Posts
- 1,046
Not sure what you are really asking but here's what I suspect. The banjo fitting has three basic parts. The fitting itself, the bajo bolt, and two crush washers usually copper. To attach to your caliper on crush washer goes between the bolt and the banjo fitting. The other washer goes between the fitting and the caliper. The brake line then connects to the AN fiting on the banjo fitting.
Hope this helps some.67 Firebird Convert 455 +.060 Johnny Winters TH400 74cc KRE d-port flowed @ 310 cfm heads piston dished 16cc H-beam rods Comp Cam 305-AH-8 cam 108* LSA 253/260 @.050 duration .577/.594 lift w/1.65 rockers Ford 9" 3.55 Detroit Locker M/T Sportsman Radials 31x18x15 on Convo Pro 15x15s
Honest dad that 455 on the side of the block is a serial number
-
Reply With Quote
