Results 1 to 15 of 15
Thread: Need help with a hub!
Threaded View
-
01-25-2011 #10
Registered User
- Join Date
- Jan 2006
- Location
- Oregon
- Posts
- 1,773
Chevy applications from the following years and body classifications:
Originally Posted by Nessumsar
1964-1972 A-body drum/drum
1967-1969 F-body drum/drum
1968-1974 X-body drum/drum
Some of the BOP applications are the same as the Chevy's, others are not. There are also some disc brake hubs that were used on the 4-piston setups in 67-68 on various applications which look like drum hubs but have different flange offsets, so beware that they exist. If you set the Chevy drum hub flat on a table with the snout pointing up, the distance from the face of the flange to the table should be approximately 2.415" (or 2-7/16" plus or minus in rough tape measurement numbers if you prefer).
Tobin
KORE3
It's what I does.
-
Reply With Quote
