Results 1 to 20 of 949
Hybrid View
-
07-03-2023 #1
Registered User
- Join Date
- Jun 2016
- Posts
- 25
Any update on this build?
-
07-27-2023 #2
Registered User
- Join Date
- Jul 2021
- Posts
- 70
He has updated it quite thoroughly on Lateral-G under the same title.
Originally Posted by Toccoa
08-02-2023 #3
Registered User
- Join Date
- Apr 2005
- Location
- Chicago
- Posts
- 2,788
My goal is to start updating this thread over the weekend. Originally Posted by Toccoa
marty-mj
GarageScene.net High Speed Welding KDHotrods RecoveryRoomInteriors WegnerAutomotive Autometer Ride-Tech
12-29-2023 #4
Registered User
- Join Date
- Apr 2005
- Location
- Chicago
- Posts
- 2,788
Vintage Air Hose Routing ( 03-06-22 )
It's getting closer day by day by day.
Today's project is to figure out how I plan to run the coolant and AC lines.
Training this line so it lays better in the inner fender.
Hiding the switch behind the battery.
Plenty of clearance
marty-mj
GarageScene.net High Speed Welding KDHotrods RecoveryRoomInteriors WegnerAutomotive Autometer Ride-Tech
12-29-2023 #5
Registered User
- Join Date
- Apr 2005
- Location
- Chicago
- Posts
- 2,788
Battery Wiring Clean Up ( 03-06-22 )
Seriously I am getting really good at taking this car apart. Once again I am taking the positive off the mock up battery.
I slipped over some heat shrink that I will eventually heat up once every thing is complete in this area. If all works out like I plan it may look really cool or it will be a total disaster.
I need to lengthen the indicator wiring as I am routing them so they can't be seen through the grill. The good news I have extra wire so this will be a simple task.
Animal crackers just because I was hungry and I found them in the cabinet.
- - - Updated - - -
Since they were wound up in a tight circle and I was tired of fighting them. I hung them and turned up my Forced Air Heater and warmed them up for a couple hours. The good news it worked and they un-curled quite nice.
Since I am not painting the radiator for this version of the car. I decided I was going to smooth out these scratches.
couples minutes later. Success !
marty-mj
GarageScene.net High Speed Welding KDHotrods RecoveryRoomInteriors WegnerAutomotive Autometer Ride-Tech
12-29-2023 #6
Registered User
- Join Date
- Apr 2005
- Location
- Chicago
- Posts
- 2,788
Ride Tech Diagonal 4-Bar Install ( 03-13-22 )
Yet another while I am here task. Somehow and I don't know how the rod ends where not aligned so off they have to come to align them. I of course thought this was going to be an easy project. Well it was not and it was not even fun !!
Remember if you are ever putting these in make sure the are parallel.
Reply With Quote
