2nd Chance Camaro - Let the Project Begin

[syborg tt]

Hopefully this will be the last time the Atomic Transmission gets installed.



I used the lift on the jack to support the engine.





Originally I was going to try to install the transmission with the headers and exhaust installed. However I
quickly decided that the 30 minutes it takes me t remove the entire exhaust system would be the way to go.









This is the only nut that is a pain in the ass to get to. Thankfully the motor has header studs.







Yes this is the exact height I need to get the trans in the car while it is on the lift.



So the first attempt didn't go as planned. Apparently I forgot to remove the powder coating that was in the alignment hole.





Here we go again. (( Twice as it seems the torque converter moved out the 3rd time ))







Yet to do is replace the trans pan and pan hardware.



Time me...let's see how long it takes to put all of this back in.















33 Minutes to get everything back in and now I am calling it a night