Porsche 356 Outlaw Project

[Restomod]

Here is my 1963 Porsche 356 Outlaw project.

The body will be in epoxy primer this week!!!
Other project becons.........
I have replaced the following with metal from Stoddards ($1000 worth)
The front and rear pans, both Rockers (complete), both longs,
front suspension "V" brace.
The hood has been repaired inside and out
The pass door has been repaired inside and out but still needs
work on the outter skin.
The driver doors bottom had been repaired but still needs the lower skin
The rear edge of both front fenders have had repairs.
The Nose has a couple minor dents but nothing bad.
The front compartment/battery box floor was replaced with a heavy
guage home made patch.
The rear deck lid is in good cond. but I only have one grill.
The car was being set up to use a hot VW engine and trans so
the rear seat floor was removed and will need fabrication.
I have Empi 2" drop disc brake kit for the front
Empi rear disc kit with parking brake in the caliper.
Empi super shifter with linkage kit
4 911 steel spare wheels with the oval holes that I was going to use with 5x130 pattern
2 stock front seats NO rear seats
Door glass, quarter glass, vent glass NO FRONT OR REAR WINDSHIELDS.
NO gauges unless you want the 914 guages I have.
Two stock steering columns
912 trailing arms with 944 stubs and two 944 axles
There are NO heater tubes!! This was going to be a "Hot" street car and maybe water cooled not a trailer queen.
New repo headlight lenses and trim.

Car will come with an OPEN Arkansas title
The door tag and stamped VIN are there and all match!!!!!
I think thats all...................
$7500.00 FIRM. NO trades!! No scammers no gmail emails...
Anyones interested better step up now because after it is primed it will hit auction Monday and them it will be GONE!!!!!!!!



Local pick up!

Price($): 7500