Results 1 to 3 of 3
Thread: what spot welders
-
12-17-2010 #1
Registered User
- Join Date
- Nov 2008
- Location
- Atlanta, GA
- Posts
- 431
what spot welders
I'm thinking about buying a spot welder and was curious if anyone had any good recommendations. I know HF makea an inexpensive unit, but not so sure of the quality. I'll mainly be doing sheet metal work. Any advice from those that have tried both high end and low end units would be great.
Thanks,
Dave
1972 Nova
1967 RS/SS Camaro - current project
-
12-17-2010 #2
Registered User
- Join Date
- Dec 2004
- Location
- Midwest
- Posts
- 2,263
We've been using an HTP Quickspot II for several years, and it works very well on sheetmetal.
Kevin Oeste
V8 Speed and Resto Shop
V8TV
Muscle Car Of The Week
V8 Radio Podcast
All about us:
https://www.v8speedshop.com
02-01-2011 #3
Registered User
- Join Date
- Nov 2008
- Location
- Atlanta, GA
- Posts
- 431
Kevin - thanks for the recommendation. I actually went with the Miller LMSW-52, 220 volt unit. However, it's difficult to set up and I can't seem to get it just right without burning through the metal. As much as I love Miller, it's going back. I spoke to Jeff Noland at USA WELD regarding the HTP Quickspot II, and decided to give it a try. It seems pretty straight forward and user friendly. I wish I would've taken your advice sooner!
Big thanks!Dave
1972 Nova
1967 RS/SS Camaro - current project
Reply With Quote
