Results 1 to 4 of 4
Thread: Intro Wheel Offset
-
12-12-2010 #1
Registered User
- Join Date
- Sep 2008
- Location
- California
- Posts
- 16
Intro Wheel Offset
A friend of mine is building a '70 El Camino and just got a beautiful set of Intro Wheels. Unfortunately the offset is wrong. He asked me if it was possible to move the centers but I wasn't sure. I thought I would run it by you guys. I'm sure he will have the shop that ordered the wheels ask Intro but you never know how acurate the answer will be. If you need to move the centers inboard can they be cut out and repolished? Or is he going to have to have another set built? They are 19 x 10's and need about 2" less offset. Any help would be appreciated -
Jim Burns
'69 Camaro Mine
'00 Camaro SS Hers
'92 Camaro Recent addition for oldest son
It was so bad we called it the "Rust Rocket"
-
12-12-2010 #2
Registered User
- Join Date
- Aug 2004
- Location
- Roswell, N.M.
- Posts
- 572
Hello,
Intro can rehoop your wheels with the required offset you require. Be aware that there is a minimum and a maximum available offset.
12-12-2010 #3
Registered User
- Join Date
- Sep 2008
- Location
- California
- Posts
- 16
Thanks I'll call them in the morning. I wasn't sure if they could reuse the current hoop or not.
Jim Burns
'69 Camaro Mine
'00 Camaro SS Hers
'92 Camaro Recent addition for oldest son
It was so bad we called it the "Rust Rocket"
12-12-2010 #4
Registered User
- Join Date
- Aug 2004
- Location
- Roswell, N.M.
- Posts
- 572
The hoop will be a new replacement and the wheel repolished.
Thanks,
Reply With Quote
