c5 rear suspension

[trmexrunner]

want to run c 5 rear suspension and wondering what people are doing for rear diffs. i dont want to run the rear trans. was hoping some one makes a 9 in housing to work with the axles.

[MrQuick]

there was a guy that was doing them but with a hefty price. 4-5K range

What kinda car are we talking about?
Vince

[trmexrunner]

mustang similar to ron s running full front and rear corvette suspension. think im going to just run the factory pumkin and hope i can find someone to produce the block off plafe for the drive shaft.

[Bryce]

Ron S. has truck arm rear suspension with a live axle.

I cant remeber who... but somebody makes what you are asking for. I think its based on the C4 corvette. Try searching for that here: https://www.pro-touring.com/search.php

[trmexrunner]

yea i found were the guy is going to make a block off plate for the c5-c6 rear diff. i guess i should have said its going to look like ron s mustang. i already have the c-5 front and rear suspension. so was hoping to be able to use it

[SLO 65]

You can use a Dutchman Motorsports 9 inch center section with Porsche 930 CV's (Page 19 in their catalog):

http://www.dutchmanaxles.com/images/...s/axle_cat.pdf

Porsche 930's are the same spline as the stock Corvette axle shaft (post 24):

http://www.gt40s.com/forum/gt40-buil...s-today-2.html

[trmexrunner]

slo thanks for the links that what im looking for only question is if 930 cv's will hold up to 650hp on the street. i know that around 300hp is max in the offroad industry for 930's , maybe i'll need to look into some custom axles for a 934 inner to factory vette outer cv

[19,69camaro]

Check these guys out they make full frames for vettes using c5 parts but they do it without the transaxle and torque tube http://www.streetshopinc.com/c5andc6for53-82.html