Results 1 to 3 of 3
Thread: bump steer
-
11-15-2010 #1
Registered User
- Join Date
- Aug 2009
- Posts
- 124
bump steer
Hi guys,as you know i race my 80 bu as a road course here in chile,and i want some info and pics about how to do ,the chipest way to fix the bump steer in my car,i v,seen some guy to who fix the inner tie rod in other way.
regards
-
11-16-2010 #2
Registered User
- Join Date
- Mar 2010
- Location
- AZ
- Posts
- 801
The easiest would be to get a 5/8" taller than stock lower ball joint. Most tall ball joints for the application are only 1/2" taller than stock though. The only other option IMHO would be to either alter or make a new center link that moves the pivot point for the inner tie rod. How much it needs to move would depend on application.
Robert R.
1988 S10 blazer 5.0L SBC 700R4 body off build.
1991 S10 Blazer 4.3L too low daily.
1975 Cutlass Salon currenlty 350/th350
Stupidity should be painful.
11-18-2010 #3
Registered User
- Join Date
- Aug 2009
- Posts
- 124
thanks,i saw a picture ,i think from this forum from the guy who make it ,but i cannot remain where is the post.
Reply With Quote
