Results 1 to 2 of 2
-
11-12-2010 #1
Registered User
- Join Date
- Aug 2004
- Location
- Rustburg, Virginia
- Posts
- 3,436
Steel Shape Charts w/ weights per ft
Angle - http://www.metrosteelfl.com/angle.html
Plate - http://www.metrosteelfl.com/plate.html
WF Beam - http://www.metrosteelfl.com/beams.html
Channel - http://www.metrosteelfl.com/channel.html
Round Bar - http://www.metrosteelfl.com/rounds.html
Square Bar - http://www.metrosteelfl.com/squres.html
Strip - http://www.metrosteelfl.com/strips.html
Flat - http://www.metrosteelfl.com/flats.html
Square Tubing - http://www.metrosteelfl.com/squaretube.html
Rectangular Tubing - http://www.metrosteelfl.com/rectube.html
Pipe - http://www.metrosteelfl.com/pipe.html
Sheet - http://www.metrosteelfl.com/sheet.html
Expanded Metal or Grating - http://www.metrosteelfl.com/grating.html
1970 RS/SS350 139K on the clock:
89 TPI motor w/ 1pc rear seal coupled to a Viper T56 via Mcleod's modular bellhousing w/ hydraulic T/O bearing from the Viper, 12 bolt rear w/ 3.73 gearing, SC&C upper control arms, factory lowers with Delalums, C5 brakes at all four corners, Front Wheels 17x8's with Sumi 255/40/17 and Rear Wheels 17x9's with Sumi 275/40/17.
Brief description of the work done so far can be found here: http://www.nastyz28.com/forum/showthread.php?t=112454
-
11-15-2010 #2
Registered User
- Join Date
- Oct 2006
- Location
- McKinney, TX
- Posts
- 899
Good info. If you know of a central place for the strength ratings of the different types of steel that would be awesome as well.
Whenever I am about to start a project, I take a great expedition of the internet to find the different ratings--why pay for a 1/4" thick 2" OD square tube when a 1/8" thick 1" OD square tube will do!?Confucius says, "Choose a job you love, and you will never have to work a day in your life"
My build Beast
Reply With Quote
