Master cylinder- C5 caliper problem.

[osdmike]

Hi!
I have a problem with a master cylinder and caliper match.
The car,a Chevelle -66 LS1/T56, had a CPP disc brake kit mounted.

Now the front calipers are Corvette C5.
Calipers in rear,same as before.(CPP)

Brake booster is still CPP.

Master brake cylinder replaced with -00 Camaro.

To get the brakes to lock up in the front, I have to press very!!! hard.

I also mounted a proportioning valve in the rear circuit.
It seems to work as it should, to find the right balance front/rear.

Any suggestions how to make the C5 calipers work on this Chevelle?

Change master cylinder?....brake booster?....or both?....or?

Mike.

--