Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 18 of 18

    Threaded View

    1. #12
      Join Date
      Mar 2010
      Location
      AZ
      Posts
      801
      Country Flag: United States
      The coil-overs being vertical will only affect roll rates a very small ammount, and would make the maths a lot harder if done by hand. Personally I've become obsessed with adjustable rate rear bars lately, and given your fabrication ability that may be a good idea for you, that will let you dial it in for your preference and the track. You could go all the way up to the bars that are in-cab adjustable, that rotate the swing-arm so that it is allowed to deflect and absorb some of the force before it's handled by the actual torsion bar, but that gets really expensive, really fast. A frame mounted splined bar with custom arms with multiple holes would be a very easy way to get a bar on the car for about $200 and let you tweak it. And once you have all the hardware, a replacement bar to change the base rate, in case you don't have enough adjustment in the arms, will only set you back about $80, instead of another $200 bent bar.

      Robert R.
      1988 S10 blazer 5.0L SBC 700R4 body off build.
      1991 S10 Blazer 4.3L too low daily.
      1975 Cutlass Salon currenlty 350/th350
      Stupidity should be painful.





    Advertise on Pro-Touring.com