Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 4 of 4
    1. #1
      Join Date
      Feb 2006
      Posts
      13

      Howe Precision Lower A-frame bushings

      Anybody using these ?

      http://www.howeracing.com/p-7575-bushings.aspx

      I saw a post from Mark at SC&C on Chevelles.com that he had a customer running them to good results but was looking to see how they held up on the long term.

      Kurt

      Last edited by khkiley; 10-24-2010 at 03:28 PM. Reason: Botched the title


    2. #2
      Join Date
      Jul 2005
      Location
      Marshall , MO
      Posts
      699
      Not sure about the howe stuff I am thinking about running these from AFCO http://www.afabcorp.com/AFCO_Dynatec...ct_lw-bushings
      Brad Shepard
      69 Malibu
      Marshall, MO

    3. #3
      Join Date
      Jul 2010
      Location
      Sacramento, CA
      Posts
      1,214
      Country Flag: United States
      I wouldn't use them in a street application. The AFCO ones would be fine, or any number of Acetal ones.

    4. #4
      Join Date
      Sep 2004
      Location
      PA.
      Posts
      935
      Country Flag: United States
      The Howe pieces are pretty cool. They basically use Howe`s ball joint construction methods for a LCA bushing. They`re smooth and quiet but will transfer a bit more high frequenct NVH than a delrin bushing. the issue for street use is sealing them from the elements. Our client has been running them on the street for 2 or 3 years now with good results, he used closed cell foam to seal them up. I`ve wanted to play with them for some time now but I`ve never gotten around to it. The Afco lightweight LCA bushings are actually a pretty poor choice for street use. The nylon inserts are loose and rattle around in the housings (NVH anyone?). Worse they have no bushing or synthetic washer for the thrust surfaces, they`re steel and rub directly on the mounting brackets. I bought a few sets a couple years ago to check them out as a good low cost alternative part, they`re still in a box around here somewhere... A good set of greasable delrin bushings is still hard to beat in this application. Mark SC&C




    Advertise on Pro-Touring.com