Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 6 of 6
    1. #1
      Join Date
      Jun 2010
      Posts
      60
      Country Flag: United States

      Pontiac to chevy engine mounts

      Has anybody tried using these?
      http://carshop.carshopinc.com/produc...110328/CSP2380



      Seen some pictures here using the chevy mounts but they seem to sit to far forward on crossmember.
      2003 Silverado RCSB with Procharger
      1967 GTO LQ4/muncie project


    2. #2
      Join Date
      Jun 2010
      Posts
      60
      Country Flag: United States
      Well I bought them can find my camera but using the truck brackets the power steering pump hit. This was using the stock frame mount bolt holes. Re-drilled the holes one inch back and then had stock pulley hitting, replaced with smaller pulley and looks real good. Will post pictures as soon as I can.
      2003 Silverado RCSB with Procharger
      1967 GTO LQ4/muncie project

    3. #3
      Join Date
      Jan 2008
      Location
      Houston, TX
      Posts
      193
      Country Flag: United States
      Please post pics when you can. I'm looking at these for my 72 GTO.
      Asa Walker
      Houston, TX

    4. #4
      Join Date
      Jun 2010
      Posts
      60
      Country Flag: United States
      Sorry no luck with camera my 2 year old might have hidden it like eveything else.
      2003 Silverado RCSB with Procharger
      1967 GTO LQ4/muncie project

    5. #5
      Join Date
      Jan 2005
      Location
      Enfield, CT
      Posts
      423
      Country Flag: United States
      I didn't have a problem. Just bolted smallblock Chevelle mounts on my GTO. Those mounts look like they move the engine forward or something...
      '67 GTO - LS3, 4L60E, SC&C AFX Package, KORE3 C6 Z06, Boyds PT-09s

      https://www.pro-touring.com/showthre...7-GTO-LS3-Swap


    6. #6
      Join Date
      Dec 2010
      Location
      St Louis
      Posts
      453
      Country Flag: United States
      Those look like they move the frame mount position to the chevelle position and use the BOP mount bolt holes.
      I bought a pair of small block chevelle monuts ($10 on ebay) for my 72 Olds and the frame was already drilled for those mounts.




    Advertise on Pro-Touring.com