Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 9 of 9
    1. #1
      Join Date
      Sep 2010
      Posts
      5

      455 pontiac headers

      looking for headers for my 455 going into a 69 f-body with a tci subframe, anyone been there before?



    2. #2
      Join Date
      Aug 2008
      Location
      Pgh, PA
      Posts
      2,177
      First place I would check is Dougs. The TCI clip will make it a little more interesting, but in general Dougs are the "go to" solution for ponchos. I would probably try to identify the spots where the TCI clip departs from factory geometry and then call to ask Dougs/Petronix.
      '66 GTO Vert Project "Red Ink", 462ci of stroked pontiac power, TKO600, SC&C Stg II+, Tubular lowers, Currectrac Rear suspension, Moser 12bolt w/Truetrack, Wilwood Master and discs all around, too much fun for words...

    3. #3
      Join Date
      Jan 2005
      Location
      Netherlands
      Posts
      1,012
      chek out TRI-Y headers . go to performance years exaust forum. best groundclearense header for pontiac and great fit.

    4. #4
      Join Date
      Aug 2008
      Location
      Pgh, PA
      Posts
      2,177
      Quote Originally Posted by Roadrage David View Post
      chek out TRI-Y headers . go to performance years exaust forum. best groundclearense header for pontiac and great fit.
      Have you heard if anyone has yet done a dyno with the headers on a relatively serious motor to determine the effect of them compared to a traditional 4-1 stepped header?
      '66 GTO Vert Project "Red Ink", 462ci of stroked pontiac power, TKO600, SC&C Stg II+, Tubular lowers, Currectrac Rear suspension, Moser 12bolt w/Truetrack, Wilwood Master and discs all around, too much fun for words...

    5. #5
      Join Date
      Apr 2004
      Location
      OKC, OK
      Posts
      3,739
      Country Flag: United States
      we have coated hedmans on out 70 bird just finishing and fit is almost too good with stock sub. so close to floor i can't rotate the 3 bolt collector flange without hitting floor. I did have to do a little grinding on the sub in one spot on each side on the frame for clearance but otherwise excellent fit
      Mike Redpath
      Musclerodz & Customz
      405-288-0189
      pro-touring parts specialists
      Musclerodz.com

      facebook page
      http://www.facebook.com/#!/pages/Mus...73054649402015
      instagram
      Musclerodz

    6. #6
      Join Date
      Sep 2010
      Posts
      5
      have not purchased the tci as of yet, so if someone else's like speed tech, detroit, and the like have been accomplished would like to hear about it. the pontiac is just so sweet that I have to use it. I saw wickedbirds set up (car is for sale $35,000) way to cheap for what he has in it, any one know any one else that has custom fabbed them to fit an aftermarket sub? I appreciate the help with the headmans, looked at tri_y and doug's I will call them tomarrow. thanks

    7. #7
      Join Date
      May 2010
      Location
      Orange, CA
      Posts
      456
      I work for Doug's - in Header Design. I can tell you that we have not tried that combination and won't be able to tell you if it will fit or not BUT I am willing to work with you to try a set once you have the sub frame and engine in place.
      PM me for details
      Don
      Life is not a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, thoroughly used up, totally worn out, and loudly proclaiming 'WOW What a Ride!'

    8. #8
      Join Date
      Sep 2010
      Posts
      5
      thanks dyno don, I will give you a call today and we can work out the details. I've built headers with the "ice" kit and fabbed them up, just looking to avoid that this time and leave the design/engineering to the pros.

    9. #9
      Join Date
      Mar 2007
      Posts
      43
      I have a set of Doug Thorley 3 tube headers on my 67 firebird and they are the nicest fitting headers I have owned. the center tube is 2 1/4" and it covers both center ports on a D port head, take a look at them for sure. I can remove both headers with the engine in place.







    Advertise on Pro-Touring.com