Results 1 to 5 of 5
Thread: trailblazer ss intake
-
09-12-2010 #1
Registered User
- Join Date
- Sep 2009
- Posts
- 159
trailblazer ss intake
I recently purchased a ls2 out of a trailblazer ss and would like to know what i need to swap to the ls6 intake? Do i need to purchase anything else besides the intake etc...
thanks, kevin
-
09-13-2010 #2
Registered User
- Join Date
- Jul 2006
- Location
- Pensacola, FL
- Posts
- 1,264
Hey Kevin. If the TB SS accessories are the same as the other trucks, the LS6 intake wont work with them. You'd need to run vette or Fbody accessories. I think GTO acc, may work as well but i am not that familiar with them. The trottle body will not clear the truck accessories. Manifold should work no problem. May also need LS6 steam pipes, depending on what is on your TBSS motor. Scott
09-13-2010 #3
Registered User
- Join Date
- Sep 2009
- Posts
- 159
Ok thanks for the info.
09-13-2010 #4
Registered User
- Join Date
- Nov 2006
- Location
- Mountain Springs, Texas
- Posts
- 4,825
There is a lot of good swap information at www.ls1howto.com
Edit: Just remembered you have an LS2 so some of the above site may not apply.1969 Camaro - LSA 6L90E AME sub/IRS
1957 Buick Estate Wagon
1959 El Camino - Ironworks frame
1956 Cameo - full C5 suspension/drivetrain
1959 Apache Fleetside
09-15-2010 #5
Registered User
- Join Date
- Sep 2009
- Posts
- 159
I'm now leaning towards ditching this ugly intake and going carbed now. Possibly the ls Victor Jr with a Holley HP?
Reply With Quote
