Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 4 of 4
    1. #1
      Join Date
      Aug 2004
      Location
      Holmes Hollow, Ontario Canada
      Posts
      991

      engine and trans- help me decide

      If you've read my tpi thread recently then you've seen this new question but if not here's a refresher with an appropriate title:
      I need a fuel injected engine and overdrive trans for my 68 firebird convertible. The engine has to make between 450 to 500 hp if I'm going to be able to go unit swinging with father-in-law and brother-in-law who both have c5s. I'm only worried about straight lines - not the curves. I'm also trying for a budget of $10 000. The car currently has a sbc in it. It'll get frame connectors and the rear should be able to handle it. I'm not big into tuning or computers so keep it simple please and I don't want to cut my trans tunnel as the interior is already going in. Here is what I see are the options, please chime in on what you think I should go with and how I should go about it:
      1. stroked pontiac with pro products f.i. and 200r4
      2. lt1 and
      3. sbc and holley stealth ram or ? and
      4. ls2 and 4l60e
      5. ? you tell me ?
      The more I research this stuff the more I have no idea which way I want to go.

      ____________________________________________
      Scott


    2. #2
      Join Date
      Jul 2006
      Location
      Pensacola, FL
      Posts
      1,265
      Country Flag: United States
      You can make that HP easy with any LSx motor setup, even the 5.3. LS1, LS2 or 6.0 truck motor would be my choice. Go with an LSx motor, its a no brainer with your budget. You wont regret it. Scott

    3. #3
      Join Date
      Jul 2006
      Location
      Pensacola, FL
      Posts
      1,265
      Country Flag: United States
      Forgot to ask if you'd be doing the swap yourself or paying a shop. Paying for the complete swap could get expensive. Check this combo out:
      https://www.pro-touring.com/forum/sh...ad.php?t=71912

    4. #4
      Join Date
      Aug 2004
      Location
      Holmes Hollow, Ontario Canada
      Posts
      991
      Trust me, I've been staring at that thread. I would be doing the install myself. What i worry about with the LS isn't the price of the engine - its the price of everything you need to do the swap. I was talking to Hotrod Lane who said I'd be spending at least $5000 for everything for the install. That price includes a reflashed puter and harness. I don't enjoy wiring schematics so I won't be cobbling up my own. At that price I would be at 400 hp for my target price plus a bunch of shipping.
      What do you think of a 496 ci injected pontiac? I love the idea of gobs of torque and a pontiac under the hood. I know I shouldn't go that route but I need somebody to tell me why. I can't go much further until I figure this one out.
      Life is good when the engine in your project car is your biggest problem.
      Last edited by Ishmael; 09-06-2010 at 04:50 PM. Reason: afterthought
      ____________________________________________
      Scott




    Advertise on Pro-Touring.com