Cuda

[Cuda-Viper Project]

I'm building a 70 Cuda shell on top of a complete Hennesey, 3rd generation Viper. Problem. . . . . The wheels and tires don't fit in the front fenders. I need about 2 inches on both front fenders in order to put a decent sized front wheel/tire combination with reasonable backspacing and etc.

Anybody have any experience fabricating Cuda Fenders? Repops?



Thanks

[wellis77]

http://www.timemachinesinc.com/

[MrQuick]

how are your old fenders?

[Cuda-Viper Project]

The fenders are 1970 Cuda fenders and they're in very good shape. Any ideas?

Thanks!

[Drewcrane]

you will have to so something like this,
http://camtecs.typepad.com/.a/6a00d8...224890d970b-pi


i have some old fenders that have a little rust near the bottom rear but these could be modified if you have the talent or find someone that does or go with a fiberglass unit

here is thread on this discussion

http://www.cuda-challenger.com/cc/in...?topic=71075.0

[wellis77]

OR, you could call time machines (a sponsor here) and talk with them about what they did. They have put multiple challenger/cuda bodies on Viper chassis's and from their pics, it doesn't look like they flared anything. Plenty of pics on their website too.

[AusMarty]

Seriously low offset front wheels.
Modified front arms.
Decreased front track.

Multiple options.