Results 1 to 4 of 4
Thread: C5 spindle height
-
05-11-2005 #1
New to Pro-Touring
- Join Date
- May 2005
- Location
- Canton, GA
- Posts
- 38
C5 spindle height
Does anyone know what the spindle height is on a C5 spindle? From upper BJ mounting surface to lower BJ mounting surface.
Thanks
-
05-11-2005 #2
Registered User
- Join Date
- Aug 2004
- Location
- Henderson, NV
- Posts
- 218
With a rough scale measurement, I got 12 5/32"
ShaneShane Wagner
1970 Chevelle "Cholula"
2010 Camaro "Proven1"
05-12-2005 #3
Full Blown G-Machiner
- Join Date
- Sep 2004
- Location
- PA.
- Posts
- 935
Don`t forget the UBJ doesn`t go into the top of the C5 steering knuckle like a conventional one. The UBJ housing is IN the knuckle with the stud or pin going downward into a taper in the UCA. That radically relocates the pickup points. Marcus SC&C
05-14-2005 #4
New to Pro-Touring
- Join Date
- Mar 2005
- Posts
- 1
Does anyone have complete dimensions for the C5 knuckle: Location of the upper and lower ball joints (ball centers) and tie rod ball center from the wheel rotation axis and the wheel mounting flange. I bought a C5 knuckle and hub but still need a lower ball joint and tie rod end to do all the measurements. I will be happy to share or compare results when I get them.
Thanks Steve
Reply With Quote
