Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Page 2 of 2 FirstFirst 1 2
    Results 21 to 23 of 23

    Thread: welded seams?

    1. #21
      Join Date
      Jul 2010
      Location
      Harrisburg, PA
      Posts
      85
      Country Flag: United States
      Seam welding is great for stiffening up the entire car, anytime you can take out body flex, you can better tune the suspension for the load being put into the car. I would limit seam welding behind the rear axle and in front of the front wheels. Make the car as rigid as possible but in the unfortunate event of a crash the area in the front the front wheels and behind the rear axle will be your crush zones so as not to transfer the energy through the car to you. As long as the car is stiff between the front and rear wheels, where suspension loads take place you achieve performance and safety.

      Joshua O


    2. #22
      Join Date
      May 2015
      Location
      Island Lake, IL
      Posts
      816
      Country Flag: United States
      Interesting thread. Welding a shell seems like a good idea but would make it hard to disassemble it were ever needed.

      Solid body mounts, subframe connectors and firewall braces are the main go-to mods for an F-Body. Reinforcing the areas surrounding those mounting points would probably be of great benefit.

    3. #23
      Join Date
      Oct 2010
      Location
      SLC
      Posts
      660
      I did most of my car between the front and rear axle. sandblasting the body first made it much easier.

      in my experience disassembling spot welds isn't all that easy. you get the occasional bad one that pops with a screwdriver, but the rest are kind of a pain in my opinion. I don't see seem welding increasing the difficulty of disassembly all that much in the event you need to go back in and replace a piece. But I am practically a surgeon with an angle grinder.
      Zach

      1970 Mach 1 build - Half-Breed (pro-touring.com)

    Page 2 of 2 FirstFirst 1 2



    Advertise on Pro-Touring.com