Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 18 of 18

    Thread: Nitro RC Cars

    1. #1
      Join Date
      Jul 2009
      Location
      New Jersey
      Posts
      536
      Country Flag: United States

      Nitro RC Cars

      Any of you run these? A buddy of mine and I got bored and I bought one of these things to play with. Holy crap! It takes a bit to break them in and get them to run but wow the fun factor is off the scale. Nitro fumes, screaming engines that require constant tune ups and 4 wheel rubber burning drifts? Its like crack. Big grin when you get 20 feet of air.

      YouTube SC8 if interested in my truck. I'm tellin ya though, if you don't want to get hooked, don't look into them. Mine is a short track truck lots of torque and no so much top end but it still goes 40mph!

      RJ Cilurso
      67 Camaro with a few things bolted to it
      12 Camaro with a few things bolted to it
      50 Chevy 5 window p/u with a few things unbolted
      USAF


    2. #2
      Join Date
      Jul 2007
      Location
      Olathe, KS
      Posts
      1,158
      Country Flag: United States
      I've never run Nitro cars, however I've had quite a few stadium trucks and other 4wd's

      My favorite is a Frankenstein of parts. It's an Ofna Monster Pirate with suspension and final drive's of a Traxxas T-Max.
      I also have an HP Savage with a ported WASP .28. That thing is flat nutty. I never would have thought you could have too much power in one of these trucks before swapping in that motor.

    3. #3
      Join Date
      May 2005
      Location
      Miami
      Posts
      2,218
      Country Flag: United States
      I never had any luck with gas RC stuff. So I stick to electric. I bought my son one of these: http://www.traxxas.com/products/elec..._erevo5608.htm

      This thing FLIES....

    4. #4
      Join Date
      Dec 2009
      Location
      St. Louis, MO
      Posts
      193
      I used to race electric a long time ago (Associated RC10) and then my brother-in-law started racing nitro about three years back so I go the itch again. I ended up getting a Losi 8ight RTR. There is a track right by my house that I have taken it to, but have never raced...I only have room in my budget for one expensive hobby!
      Tim
      1972 Camaro

    5. #5
      Join Date
      Jan 2008
      Location
      Long Beach, Ca
      Posts
      1,564
      Country Flag: United States
      I have a first-gen T-maxx, only stock peices on it are the spindles....
      .26 engine, 1/8 scale buggy diffs., and more and more...

      Haven't been playing with it much recently, as my "real" toy needs the funds more. I might have to pull it our of the moth-balls though!
      Jon Rasmussen
      Ex Team OLJ.
      '72 Nova

    6. #6
      Join Date
      Jul 2009
      Location
      New Jersey
      Posts
      536
      Country Flag: United States
      Yeah, my real car is 1800 miles away and I have nothing to play with. I really like the scale model type cars not the space ship looking truggies and stuff. They are faster, but I like mine to look like a real truck. I love my SC8. Its an absolute blast.
      RJ Cilurso
      67 Camaro with a few things bolted to it
      12 Camaro with a few things bolted to it
      50 Chevy 5 window p/u with a few things unbolted
      USAF

    7. #7
      Join Date
      Aug 2004
      Posts
      2,413
      My Nova would be lightyears farther than it is now if I wouldnt have got into Nitro RCs. I had a gen one T-Maxx that I had $2500 into then i sold it and ended up doing 2 other high dollar trucks and Then I woke up and realized how much cash it was costing... ($100 a weekend as long as nothing broke and fat chance of that)
      Nothing says "I built this" better than tool marks and dykem blue..

      Follow my 3 link build. https://www.pro-touring.com/forum/sh...ad.php?t=61592

    8. #8
      Join Date
      Aug 2004
      Location
      Burnaby, BC, Canada
      Posts
      1,388
      Nitro's are fun, but so finicky to tune.

      Once I got my HPI Baja 5B gasser I never touched one of my Nitro's again:





      1969 CAMARO RS

      2002 LS1-T56 Dyno results: 452 rwhp, 425 rwtq
      Project pics of my '69
      Lateral-G Feature Page
      Camaro Performers Magazine Feature

    9. #9
      Join Date
      Oct 2004
      Location
      St.Anne Il
      Posts
      3,924
      Country Flag: United States
      i just moved about 20 of them in my garage the other day..our local track closed about 4 years ago and i havent messed with them much since..they are a blast though..
      Darrin Stalnecker
      1969 Camaro Convert full pt pr
      2007 Corvette Supercharged
      1968 Camaro LS1 T56
      http://www.fquick.com/dropit69

    10. #10
      Join Date
      Feb 2005
      Location
      SF bay area, CA
      Posts
      135
      battery and motor technology have come such a long way in the last decade that the advantages of nitro are pretty much gone, whatever they were. Run time? I can keep a brushless motor and a pair of 5000mAh batteries going longer than I have the attention span for it. Power? Try pulling a wheelie at any speed on demand, or back-flipping a truck from a standstill, with nitro.

      I haven't touched my nitro stuff in ages. They're sitting in storage and I go "vroom vroom" with them once in a while when I go in there. T-Maxx, Nitro RS4 with 2-speed trans, 1/8 scale Monster Blazer, couple of generic 1/10 buggies.. we'd wind them out good at the abandoned hangar lots in Alameda when I went to school there. Blown connecting rods, airborne skids that would put a pre-roof flapped NASCAR to shame, tires worn to the point the treads would fly out... good times.

      The gasoline 1/5 scale buggies are cool, wish I had room to run one of those.


    11. #11
      Join Date
      Sep 2004
      Location
      VA
      Posts
      281
      I have a savage I run every once in a while.... def something fun to do while you are bored.. I chase the dog around with it mostly

    12. #12
      Join Date
      Jul 2007
      Location
      Olathe, KS
      Posts
      1,158
      Country Flag: United States
      Quote Originally Posted by Ron L View Post
      Power? Try pulling a wheelie at any speed on demand, or back-flipping a truck from a standstill, with nitro.
      I'll see that, and raise you the sound of an internal combustion engine screaming at 40,000 RPM The bigger nitro motors don't mess around, especially when ported.

      With that said, I do love electrics. If I were spending any more time with my trucks I'd be moving that way. It's nice to be able to throw in a set of packs and run, instead of tweaking for 30 minutes, then running for 15 before I get bored.

    13. #13
      Join Date
      May 2005
      Location
      Sin City
      Posts
      330
      At one time (years ago)I was racing 1/10 elec off road, 1/8 2wd Associated RC500 on road course and a WCM 1/4 scale stock car....
      Didn't have too many down weekends...
      Always wanted to do 1/5 on road....

      We put stock car bodies on the Nitro cars and ran a "500" oval race..... I blew a motor about 1/2 way thru while leading... I was moping when a friend who had already trashed his car offered his motor to finish... Got it in and finished 3rd....
      Kurt G
      Las Vegas

    14. #14
      Join Date
      Jul 2010
      Posts
      497
      Country Flag: North Korea
      Quote Originally Posted by Rhino View Post
      I've never run Nitro cars, however I've had quite a few stadium trucks and other 4wd's

      My favorite is a Frankenstein of parts. It's an Ofna Monster Pirate with suspension and final drive's of a Traxxas T-Max.
      I also have an HP Savage with a ported WASP .28. That thing is flat nutty. I never would have thought you could have too much power in one of these trucks before swapping in that motor.
      I have one of those and it would never stay together for me. I've got the short lived proline conversion bulkheads.

      I had to do the conversion because my original setup would not hold together. I had an XTM 24.7 with torquey gearing. Even with 4wd it still had the power snap a dog bone on a hard acceleration.

      I've never really understood the "finicky" aspect that people complain about. I've tuned everything from crappy traxxas engines, to the high end touring car race engines. Its not terribly hard to get them humming at their peak

      However, i don't do the RC stuff anymore. I quickly lost interest when i discovered weekend drag racing. I still have a ton of cars, but so far my favorite of any RC has been the 1/8 scale buggy. They are so much fun on any terrain

    15. #15
      Join Date
      Aug 2005
      Location
      SF, Bay Area
      Posts
      447
      currently playing with an hpi firestorm and a tamiya tt-01 with a max mamba motor but i think i just want to get a baja 5t and call it a day! ohh wait i cant i just spent another $1000 on front suspension.

    16. #16
      Join Date
      May 2005
      Location
      Sin City
      Posts
      330
      A Baja 5T w/Modified stock car body kit and a dirt oval would have me back in r/c again in a heart beat...
      Kurt G
      Las Vegas

    17. #17
      Join Date
      Mar 2002
      Location
      Redwood City, CA
      Posts
      1,895,413,640
      Country Flag: United States
      I used to play with Nitro RC cars with my cousin back in the day. I don't remember how many dogbones we lost flipping the cars. I do remember my cousin running about a half mile to catch his car when the speed control disconnected and the car took on a mind of it's own and left. That was fun. I kinda want to get back into it.
      Allen Ortega
      Meanstreets Performance Fabrication

      ---------------------------------------

      Vegetarians are the reason for global warming

    18. #18
      Join Date
      Aug 2007
      Location
      Jonesboro, Arkansas
      Posts
      2,506
      Country Flag: United States
      I've never had the gas cars but I've still got nitro boats. Now that's fun!!! I don't have it any more but I used to have a boat that ran a motor that had a single piston, turned 30,000 rpm, and developed just over 4. horspower. Ran on 70% nitro. Man, those were the days. The boat I have now isn't near that nice.

      Carl

      Carl Wilson
      1968 Camaro - T-56 6 speed - 383 Stroker, 2014 Mustang GT seats. FiTech EFI, Tanks Inc. Tank with Deutschwerks fuel pump.




    Advertise on Pro-Touring.com