Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 18 of 18

    Hybrid View

    1. #1
      Join Date
      May 2010
      Posts
      21

      bumpsteer problem

      toe in on bump and rebound i lower the tie rod end and made it better and i dont want to run a heim joint and space it down and cant change the steering arm. took some caster out made it better,.023 to go how do you shorten the inner tie rod ? i am at 0 toe



    2. #2
      Join Date
      Jul 2007
      Location
      Olathe, KS
      Posts
      1,158
      Country Flag: United States
      If I recall correctly, when you're toe in on both bump and rebound your tie rod is actually too short, not too long.

      Can you give us more details as to what you're doing? Steering box or Rack? What chassis is this going in? What suspension mods have been made?

    3. #3
      Join Date
      Nov 2008
      Location
      So. Cal.
      Posts
      1,240
      Country Flag: United States
      Yup, too short of an rod if you are "toeing in" on compression and rebound. You are at the peak of the circle that the steering link describes. At ride height it will be at the setting you need. And with a short rod it will pull the steering arm in with either compression or rebound. Big bump steer.

      You are at the limits of the rods. Use a longer steering rod or tie rod and unfortunately you might have to use some spacers (to lower the joint at the steering arm) to get it so you dont have any toe change for compression.

      I use Baer tracker tie rod ends. And after getting the correct rod length it was just a matter of lowering the tie rod end at the steering arm with spacers to get a minimal toe change.

      But even if you dont want to go with a baer tracker type setup, you will need to increase the length of yer rods. They sound too short. You are pulling the steering in for any suspension travel. JR
      What I write is opinion, none of it is factual. 2010

      Even though I'm conscious it doesn't mean I'm coherent. 2011

      I'm getting better with age. Best thing about old age is I don't know any better. 2012

    4. #4
      Join Date
      Apr 2009
      Location
      san diego
      Posts
      5,101
      Country Flag: United States
      wait, its too short on a front steer car. Its the opposite on a rear steer car. I think????

      What kind of car are we talking about?

    5. #5
      Join Date
      Jul 2007
      Location
      Olathe, KS
      Posts
      1,158
      Country Flag: United States
      You're absolutely right. Nice call.
      It looks like we need more info.

    6. #6
      Join Date
      Aug 2004
      Location
      Crown Point, Indiana
      Posts
      1,107
      Country Flag: United States
      I am in the middle of this same problem with my 65' MII R&P. Just ordered Baer Trackers I will keep u updated.

    7. #7
      Join Date
      May 2010
      Posts
      21

      bumpsteer problem

      forgot to mention that its a front steer rack

    8. #8
      Join Date
      Nov 2008
      Location
      So. Cal.
      Posts
      1,240
      Country Flag: United States
      Quote Originally Posted by GRNOVA View Post
      I am in the middle of this same problem with my 65' MII R&P. Just ordered Baer Trackers I will keep u updated.
      Run ALL the spacers. I think you have a similar setup as mine and after running it through all the variables the full stack was the best for me. Oh, by the way, it took me three months to get the baer tracker tie rods. I was lucky to catch them when they were moving. Geeze, my luck. JR
      What I write is opinion, none of it is factual. 2010

      Even though I'm conscious it doesn't mean I'm coherent. 2011

      I'm getting better with age. Best thing about old age is I don't know any better. 2012

    9. #9
      Join Date
      Aug 2004
      Location
      Crown Point, Indiana
      Posts
      1,107
      Country Flag: United States
      Quote Originally Posted by JRouche View Post
      it took me three months to get the baer tracker tie rods. JR
      3 months!
      I hope there here today, ordered Monday

    10. #10
      Join Date
      May 2010
      Posts
      21

      bumpsteer

      its a mustang ii front end and in a first gen Nova with a power rack.
      when i set the caster at 5 degrees it raised steering arm up to high and it got wacky. .023 is nominal . i can take some caster out but this is what i like to run on power steering cars.

    11. #11
      Join Date
      Jul 2007
      Location
      Olathe, KS
      Posts
      1,158
      Country Flag: United States
      Then it does hold true that your tie rod is currently too short.

      Toe-out on both bump/rebound - tie rods too long, height correct
      Toe-in on both bump/rebound - tie rods too short, height correct
      Toe-out on bump, Toe-in on rebound - outer tie rod too low, length correct
      Toe-in on bump, Toe-out on rebound - outer tie rod too high, length correct

      Can you give us a little more to go off of? Was the car originally rack based? What chassis is it in?

    12. #12
      Join Date
      Nov 2008
      Location
      So. Cal.
      Posts
      1,240
      Country Flag: United States
      Hahaha.. I just assumed once again, my bad. I have a front steer MII type suspension and was thinking about my problems. JR
      What I write is opinion, none of it is factual. 2010

      Even though I'm conscious it doesn't mean I'm coherent. 2011

      I'm getting better with age. Best thing about old age is I don't know any better. 2012




    Advertise on Pro-Touring.com