Results 1 to 7 of 7
-
06-22-2010 #1
Registered User
- Join Date
- Dec 2007
- Location
- Cleveland, TN
- Posts
- 42
Dash DAQ to replace traditional guages?
Finishing up a LS1 swap in my Chevelle. Thinking about running the Dash DAQ to replace all of the traditional guages in my car. It monitors off of the motor's computer. Anybody tried it yet?
-
06-29-2010 #2
Registered User
- Join Date
- Jul 2006
- Location
- El Paso, Texas
- Posts
- 411
I looked into it but decided against it due to the size of the screen. If it had some kind of feed to put a bigger monitor I would use it but 4.3 is just way too small for everything. I used the Pioneer unit instead but even that was expensive and limited. But it looks cool. <g>
http://www.pioneerelectronics.com/PU...ories/AVG-VDP1
06-29-2010 #3
Registered User
- Join Date
- Oct 2006
- Location
- Carlsbad, CA
- Posts
- 744
Very cool - nice work Cap.
06-29-2010 #4
Registered User
- Join Date
- Jul 2006
- Location
- El Paso, Texas
- Posts
- 411
Thanks. If you really want to get into something neat and have LOTS of time, check out www.mp3car.com specifically this link. http://www.mp3car.com/vbulletin/engi...agnostics-etc/ . For screen OBDII setups, it's the way to go. Maybe someday when I have more time.
Alex
06-29-2010 #5
Registered User
- Join Date
- Mar 2006
- Location
- ATLANTA, GA
- Posts
- 337
My goal.
I'm headed that direction, though I have a bit of work to do. I've written my own software to display any number of gauges and metrics.
06-29-2010 #6
Registered User
- Join Date
- Apr 2009
- Location
- san diego
- Posts
- 5,101
just run labview and a monitor, very easy.
My build thread: https://www.pro-touring.com/showthre...ing&highlight=
The mustang build thread: https://www.pro-touring.com/showthre...el)&highlight=
06-30-2010 #7
Registered User
- Join Date
- Aug 2004
- Posts
- 567
Isnt DashDaq CAN compatible only. LS2 etc.
Nathan Shaw
71 Nova, 1000+whp 5.3, 8 second autoXer.
Reply With Quote
