Results 1 to 6 of 6
Thread: dipstick issues
-
05-06-2010 #1
Full Blown G-Machiner
- Join Date
- Nov 2005
- Location
- zachary louisiana
- Posts
- 606
dipstick issues
i just put in a 700r4 in my 69 camaro and have been having some issues finding a diptick that will work. i have been throught 2 different ones at summit and they either arent long enough or wont bolt to the back of the motor. what i am looking for is a flexible firewall mount dipstick. what are some of yall running . and is there another route to go besides lokar i find it hard to spend 150 bucks on a dipstick...any help or part number would be appreciated
1969 camaro ss 372,hotchkis tvs, comp cams 268xe, world products heads, zz4 intake, 670 holley, msd setup eagle alloy 212's, autometer ultra lites......99 console with megashifter, ls1 brakes and a soon to be 700r-4
http://http://www.cardomain.com/ride/2246580
-
05-07-2010 #2
Registered User
- Join Date
- Dec 2009
- Location
- center of WA. St.
- Posts
- 77
just went down that road....
ended up w/ lokar firewall mount, like it so far.
check e-bay, believe I paid around 85 w/ shipping.
05-07-2010 #3
Full Blown G-Machiner
- Join Date
- Nov 2005
- Location
- zachary louisiana
- Posts
- 606
whats the length on the one you used
1969 camaro ss 372,hotchkis tvs, comp cams 268xe, world products heads, zz4 intake, 670 holley, msd setup eagle alloy 212's, autometer ultra lites......99 console with megashifter, ls1 brakes and a soon to be 700r-4
http://http://www.cardomain.com/ride/2246580
05-08-2010 #4
Registered User
- Join Date
- Dec 2009
- Location
- center of WA. St.
- Posts
- 77
I am pretty sure it is 24"
I will say-Lokar makes a nice product.
05-08-2010 #5
Registered User
- Join Date
- Aug 2004
- Location
- Rustburg, Virginia
- Posts
- 3,436
I was goning to suggest the Lokar stick...nice piece.
Originally Posted by drc270
1970 RS/SS350 139K on the clock:
89 TPI motor w/ 1pc rear seal coupled to a Viper T56 via Mcleod's modular bellhousing w/ hydraulic T/O bearing from the Viper, 12 bolt rear w/ 3.73 gearing, SC&C upper control arms, factory lowers with Delalums, C5 brakes at all four corners, Front Wheels 17x8's with Sumi 255/40/17 and Rear Wheels 17x9's with Sumi 275/40/17.
Brief description of the work done so far can be found here: http://www.nastyz28.com/forum/showthread.php?t=112454
05-08-2010 #6
Full Blown G-Machiner
- Join Date
- Nov 2005
- Location
- zachary louisiana
- Posts
- 606
but the 24" is the length i need
1969 camaro ss 372,hotchkis tvs, comp cams 268xe, world products heads, zz4 intake, 670 holley, msd setup eagle alloy 212's, autometer ultra lites......99 console with megashifter, ls1 brakes and a soon to be 700r-4
http://http://www.cardomain.com/ride/2246580
Reply With Quote
