Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 7 of 7
    1. #1
      Join Date
      May 2006
      Location
      Rhode Island
      Posts
      675
      Country Flag: United States

      Help! 68 firebird drum backing plate.....

      Didn't exactly know where to post this, since I'm trying to reuse this with disc brakes I put it in this forum anyway, Is the backing plate supposed to come off the spindle? cause I sure as hell can't figureout how and it doesn't want to budge, LOL. There's no screws attaching it. Its attached at that top round piece somehow, all I can figure is its just part of the spindle?!?!?! Please help a newbie





      Rene P.

      My 1968 firebird build thread--->https://www.pro-touring.com/showthre...rd-on-a-budget


    2. #2
      Join Date
      Mar 2005
      Posts
      345
      The upper anchor pin needs to be removed. They can be difficult. It goes through the backing plate and is threaded into the spindle.

      If you whack the back of the backing plate at the bottom with a hammer (lightly), most likely it will flex away from the spindle but also stay in place. This will show that it is still attached at the top.

      Bob.

    3. #3
      Join Date
      Aug 2004
      Location
      Rustburg, Virginia
      Posts
      3,436
      Country Flag: United States
      Might need a little heat and a pipewrench
      1970 RS/SS350 139K on the clock:
      89 TPI motor w/ 1pc rear seal coupled to a Viper T56 via Mcleod's modular bellhousing w/ hydraulic T/O bearing from the Viper, 12 bolt rear w/ 3.73 gearing, SC&C upper control arms, factory lowers with Delalums, C5 brakes at all four corners, Front Wheels 17x8's with Sumi 255/40/17 and Rear Wheels 17x9's with Sumi 275/40/17.
      Brief description of the work done so far can be found here: http://www.nastyz28.com/forum/showthread.php?t=112454


    4. #4
      Join Date
      May 2006
      Location
      Rhode Island
      Posts
      675
      Country Flag: United States
      Is the round part supposed to unscrew? Is that the anchor pin you are talking about?
      Rene P.

      My 1968 firebird build thread--->https://www.pro-touring.com/showthre...rd-on-a-budget

    5. #5
      Join Date
      Mar 2008
      Posts
      21
      Yes, where the brake shoes hinge. That is the only thing left, that is holding the backing plate to the spindle.

    6. #6
      Join Date
      May 2006
      Location
      Rhode Island
      Posts
      675
      Country Flag: United States
      Ok I got the damn thing out. It's not screwed in it's pressed in. Heated with a torch and pipewrenched it. Thanks for the help guys!
      Rene P.

      My 1968 firebird build thread--->https://www.pro-touring.com/showthre...rd-on-a-budget

    7. #7
      Join Date
      Aug 2004
      Location
      Rustburg, Virginia
      Posts
      3,436
      Country Flag: United States
      Sweet!
      1970 RS/SS350 139K on the clock:
      89 TPI motor w/ 1pc rear seal coupled to a Viper T56 via Mcleod's modular bellhousing w/ hydraulic T/O bearing from the Viper, 12 bolt rear w/ 3.73 gearing, SC&C upper control arms, factory lowers with Delalums, C5 brakes at all four corners, Front Wheels 17x8's with Sumi 255/40/17 and Rear Wheels 17x9's with Sumi 275/40/17.
      Brief description of the work done so far can be found here: http://www.nastyz28.com/forum/showthread.php?t=112454





    Advertise on Pro-Touring.com