Results 1 to 18 of 18
Threaded View
-
04-24-2010 #7
Registered User
- Join Date
- Aug 2009
- Posts
- 15
I've worked a little on my electrical mock-up today. I've built a 1/4 thick aluminum plate for inside my cabinet. The flat area is 14"x17" and then it bends upward near vertical ( 115 degrees ) for 8"x17". My Mastercell will mount to the vertical section (ISIS recommends vertical preferred) and have a 6" hole cut out behind it for best air circulation. There will be a trickle charger mounted to this plate to keep the battery topped up when the car is just sitting. I'm sure I'll come up with other components that can be mounted to this plate as well. Maybe a multi-disc CD changer if I go that route. (they're outdated now because of Ipods, right?) Anyway, I've plenty of room on the plate to mount relays, car alarm module, etc.
Getting use to the idea of the front Powercell being in the engine compartment. I'll just have to come up with the mounting point and would really prefer to put it in some kind of vented box. Anyone know if the Powercells are preferred vertical mount?
-
Reply With Quote
