Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 6 of 6

    Thread: Stack injection

    Threaded View

    1. #2
      Join Date
      Jul 2006
      Posts
      294
      Country Flag: United States
      I am currently doing a stack injection setup for my Nova. I think they are great but not necessarily for a beginner.

      IMO... you need to run sequencial injection to make it easier to tune. You need to plumb some additional lines for idle air control, map sensor and vacuum accesories.

      Each vacuum setup needs a seperate line going to each stack and then to a manifold. Most plumb them hidden under the manifold. I have 24 seperate lines on mine.

      You need to have a uni-syn to make sure each stack is balanced. Then you need to find some type of air filters to run on the street.

      If they are tuned properly... there is nothing better imo, however, if you dont know tuning you will pull your hair out.

      The above is assuming you want to run power brakes, want idle air control and are gonna run a map sensor.

      It sounds like a lot but its not that hard.

      You can do without the vacuum lines and tune in alpha-n.
      Tom






    Advertise on Pro-Touring.com