Results 1 to 3 of 3
Thread: door jams
-
02-23-2010 #1
Registered User
- Join Date
- Nov 2009
- Location
- Ca
- Posts
- 201
door jams
I'm repairing rust on a 67 firebird. I would like to replace the driver side rear lower door jam/piller. (Just the lower curved part). So far all I can find is the intire quarter panel with the door jam. Does anyone make just the door jam or half of a door jam?
-
02-23-2010 #2
Registered User
- Join Date
- Dec 2004
- Location
- HILLBILLY HOLLYWOOD, TENNESSEE!!!
- Posts
- 2,043
None that I have ever seen.
Contact Goodmark or whoever makes/sells the quarter panel side you need and see if they have a damaged quarter panel with with a good door jamb that you need. If they do you can usually get a smokin deal since the panel is damaged and would be junk for them but has a usable section that you need.
02-28-2010 #3
Registered User
- Join Date
- Aug 2004
- Location
- Melbourne, FL
- Posts
- 1,046
What I did a while back was similar to what vintage suggested. But, I posted it on a bunch of F'body sites. Looking for people who were replacing their full quarters and jambs. Found a cpl of folks who cut the jambs from their old quarters and send them to me. Worked out pretty well. Was VERY cheap. Both just wanted me to pay for the shipping.
67 Firebird Convert 455 +.060 Johnny Winters TH400 74cc KRE d-port flowed @ 310 cfm heads piston dished 16cc H-beam rods Comp Cam 305-AH-8 cam 108* LSA 253/260 @.050 duration .577/.594 lift w/1.65 rockers Ford 9" 3.55 Detroit Locker M/T Sportsman Radials 31x18x15 on Convo Pro 15x15s
Honest dad that 455 on the side of the block is a serial number
Reply With Quote
