Project Lethal Induction

[ChevelleNV]

Well if you see in the pictures the bars toward the back of the frame in front of where the lower control arms connects to the frame (picture 3 in post #72). I was gonna have to cut out part of the floor board where the rear passengers feet would be to accommodate the bars and the rear cross-member.

Now If I had spent a lot more time measuring and getting the bars in just the right spot. they could be fit under the floorboard without an issue. but I just got frustrated that I was gonna have to cut them out and re-do them to get them right. And I really didn't want to have to start all over. I was already in the hole for a lot of time and materials. But I did learn something from this and will take what I learned and use it on the next car I build.