Results 1 to 20 of 113
Thread: Project Lethal Induction
Hybrid View
-
02-01-2011 #1
Registered User
- Join Date
- Jan 2006
- Posts
- 86
Any thought to drilling an access hole on the botom of the frame and putting a nut on the back side of your sway bar mounts?
-
02-01-2011 #2
Registered User
- Join Date
- Dec 2009
- Location
- Carson City, NV
- Posts
- 861
Not a bad Idea.....Now that i think about it, if I were to put a small slot in the side of the frame next to were the bolt is. I could get a wrench in the with a nut on it and a lock washer.
Originally Posted by HOSTILETAKEOVER
Thanks for the Idea.....
02-01-2011 #3
Registered User
- Join Date
- Jan 2006
- Posts
- 86
From a structural integrity standpoint, a hole in the botom may or may not be better? Im sure someone with engineering knowledge may chime in. I was thinking a round hole would let you use a socket and extension to push a nut and lock washer (held with a little glue or tape) up to the bottom of the bolt.
Reply With Quote
