Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 4 of 4
    1. #1
      Join Date
      Jun 2006
      Posts
      4

      Flat Plane SBC crank

      It exists, who makes it?

      http://www.ferraris-online.com/cars/...es/P032Web.jpg

      Thanks,

      Ken



    2. #2
      Join Date
      Jan 2010
      Location
      Greenwood Lake, NY
      Posts
      105
      Yowza! That DOES look like a SBC knife-edged flat plane crank!

      I've done a bit of searching for one, with the exception of calling Callies or Lunati to see if they'd make me one! This could very well be a custom job.

      I only became curious about getting a SBC flat crank since I've been working for a certain italian company.

      It would also take a corresponding cam, but that would be (SHOULD be) and easy order to fill from one of the many cam companies out there.

      I'll be watching this one!
      Jeff.

      1972 GTO - long term project
      1968 Firebird - all original, low mileage

    3. #3
      Join Date
      Jul 2002
      Location
      Mesquite, TX
      Posts
      4,941
      Country Flag: United States
      What would the benefit of such a thing be - that 4 cylinders fire at once?

    4. #4
      Join Date
      Aug 2009
      Location
      Chandler, Az (from west NE)
      Posts
      240
      Country Flag: United States
      Engine will run like 2, 4 cylinder engines linked together; smoother power at higher rpms, better exhaust scavenging. I believe Crower used to make 180 degree SBC cranks( may still). Supposedly there is a harmonic problem with strokes much over 3". Ryan Falconer did a lot of work with the Chevrolet Indy engine of years past: Flat crank, 217", 800+ horsepower on methanol. Jerry Magnuson is building one with one of his superchargers for street use at 700 hp. Article was in Hot Rod Magazine
      Ric

      2002 s10, DD and AutoX.
      1966 Malibu owned since 1971. Drag car converting to track toy!




    Advertise on Pro-Touring.com