Looking for a Good Stud

[tonyvol]

What wheel studs are you guys using for your wheels? 7/16 or 1/2 inch. Which is more common.

[ProdigyCustoms]

If your going to big brakes or big wheels, 1.2" studs may be required, or at minumum a good idea.

[wmhjr]

I can't believe nobody has yanked your chain for the title of your thread. Must be an easy crowd tonight.

[deuce]

I can't believe nobody has yanked your chain for the title of your thread. Must be an easy crowd tonight.

looks like it got your attension..............joke...lol

[tonyvol]

Thanks guys for being easy on me.... The title could get us going in the wrong direction for sure. But on the serious side, if I use 1/2 studs will my wheel choices be limited? Also, do they make a stock front spindle for 67-69 camaros with 1/2 studs or with I have to take a stock spindle and put in 1/2 studs? Maybe it's not that much of a big deal.

[Bryce]

look into the wilwood brake kits. With my falcon they came with a new hub and utilized 1/2" screw in studs. I have ARP studs.

[PRRC]

Hey Tony, The Wilwood kits you are looking at will come with 1/2 studs. As far as wheel choice. No it will not limit you in your selection. most custom wheels use a 60 degree conical seat that will accommodate a stud size of up to 1/2" The lugs seat and center the wheel no matter the wheel stub size.
Jim will be in contact with you today with the pricing you requested.
Tim

Thanks guys for being easy on me.... The title could get us going in the wrong direction for sure. But on the serious side, if I use 1/2 studs will my wheel choices be limited? Also, do they make a stock front spindle for 67-69 camaros with 1/2 studs or with I have to take a stock spindle and put in 1/2 studs? Maybe it's not that much of a big deal.

[zerotofear]

ARP has a decent line up, we drill axles for drag racers and they like the products.