Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 5 of 5
    1. #1
      Join Date
      Apr 2007
      Location
      New Jersey
      Posts
      566
      Country Flag: United States

      Rear Tires Rubbing on fender lip

      Well finally drove the car and didnt expect this but have a terrible tire rub on the fender lip. Car is painted so I cant roll the lip. Maybe grind it but not sure if thats gonna do the trick. Running a 18x8 wheel with a 275/45/18 tire. Thinking for now Ill just go to like a 255/40 to give me some space to clear the lip. But want to go back to the big meats if I can.
      My springs are old. Not sure how old but ive had the car for 10 years so they are at least ten years old.I have about 2 between the tire and the lip. I love the way the car sits. Sits perfect. trying to figure out what options I have. The wheel offset is good as I only have about a 1/2 inch of space on the inside. Its the outside thats the issue.

      Any ideas guys

      Thanks



      Doug
      Doug L.
      68 RS/SS Conv. LSA/T56.
      67 RS Coupe LS2/T56 named "NutKse"


    2. #2
      Join Date
      May 2005
      Location
      Fontana, CA
      Posts
      4,960
      Country Flag: United States
      What is your BS?
      Nick R.
      69 Camaro - 383, 700R4, 12 bolt 3.55, Hotchkis, Bilstein, Global West, Morris Classic
      08 HHR SS - Still Stock for now
      Do you still believe in all the things that you stood by before? Are you out there on the front lines, or at home keeping score?
      Do you care to be the layer of the bricks that seal your fate? Would you rather be the architect of what we might create?

    3. #3
      Join Date
      Mar 2008
      Location
      Chapel Hill, NC
      Posts
      337
      Country Flag: United States
      That sucks. I just barely have a rub on one side when I hit bumps. I've been told that you can roll the lip with one of those expensive eastwood tools as long as you heat up the paint with a heat gun while doing it.

      I'm thinking of biting the bullet to buy one of those to fix my problem.

      I don't remember if I posted here or at Camaros.net, but I have a post and a couple guys replied with instructions on how to do it on a finished car.

      I could probably fix my problem by going down one tire size, but I want to keep my 295/50/15's.


      edit....just found my old post.
      https://www.pro-touring.com/forum/sh...ad.php?t=61022
      Dan
      Chapel Hill, NC
      ***PM me if you're close by and can help with my 65 Mustang Fastback project***

    4. #4
      Join Date
      Nov 2009
      Location
      the dirty mitten
      Posts
      1,217
      Country Flag: United States
      what about using the eastwood fender rolling tool to push the lip up and out of the way? I heard that if you heat up the paint it will not even crack when you bend the lip

    5. #5
      Join Date
      Aug 2004
      Location
      Jacksonville, FL
      Posts
      1,666
      Country Flag: United States
      I have an eastwood roller FS if anyone is interested. I bought it off of a fellow board member used it and now don't need it. Used but in excellent shape (with a extra new roller). PM me if interested. FYI, I got a 1/2 inch of clearance after rolling the lip.
      Chris
      1968 Chevy Camaro SS
      LT4 (coming)/T56 DSE suspension

      1969 Oldsmobile Cutlass S convertible (442 Clone)
      LS3/4L70e, DSE suspension





    Advertise on Pro-Touring.com