Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Page 1 of 2 1 2 LastLast
    Results 1 to 20 of 28
    1. #1
      Join Date
      Jul 2001
      Location
      Detroit, Michigan
      Posts
      6,854
      Country Flag: United States

      It's advice time again.

      Well...I have a dilemma. When I get back from Arizona at the end of this month I will begin the big push to finish the body work and get the car prepared for paint. GM shutdown is July 5th through the 15th and that is when it's going to happen. Nothing short of a natural disaster or a meteorite falling out of the sky and hitting me in the head is going to stop that from happening. I have always been a dyed in the wool 'do-it-yourselfer' and the prospect of being able to swing a Devilbiss or Sata HVLP gun across my car and lay the paint on myself is just too good to resist.

      I'm paintin' this mother....there's just no two ways around it.

      I draw my inspiration from 2 sources. One is our own Jonathan Duke of Touring Classics. I have always loved that car; it was the ultimate DIY hotrod. The other is John Doyle from Team Camaro who wrote a fantastic piece for the tech forum where he discusses How I Painted My Camaro. I am convinced that if some stupid robotic arm can paint a car....well than gosh darn it I can paint one too.



      Now...you can look at this 2 ways. One is to read this and think....wow; this guy is a real go-getter. The other has you thinking....what a moron, he’s in for the surprise of his life. I don't care. Maybe I know what I'm doing and maybe I don't. But I just feel in my heart that I can do this. I'll ask you all to kindly pray for me and my Camaro when I step into my plastic- sheeted garage this July.

      Now...onto my dilemma. Color choice.

      I have picked out a scheme that I am real excited about. However, it is quite ambitious and a bit scary at the same time. I am thinking black on top and Viper blue for the sides, separated by a subtle silver stripe that I will tape off. I did extensive taping of vertical board drawings when I did Packaging Design for General Motors and have a good eye for it. However...this is quite an undertaking for a beginner doing his first paint job. The other option is to just go ahead and paint it black. I have always loved black Camaros (although they are a dime a dozen these days). The problem is, is that there are so many Camaro G-Machines out there that you almost HAVE to do something different to set it apart. I want to remedy this in the color. Also....I'd like to think my car will have a small outside chance of being featured in a magazine someday and if I paint it black, I'm almost guaranteeing that it'll be ignored by every publication out there. So I'm in a spot here as you can see. What is the advice of the membership on this board?

      A.) Throw caution to the wind and just do the two-tone scheme. You'll regret it later if you don't. You can do it, man. Go for it.

      B.) Dude, you're nuts. You’re gonna f*ck it up. Do a solid color for your first time. You’re taking on too much.

      Thanks everyone. You’re advice will be greatly appreciated.
      1968 Pro-Touring Camaro LS1

      Project: Next Year
      - Start date; June '01
      - Completion; Sometime next year or the year after.....


    2. #2
      Join Date
      Jan 2003
      Location
      Arizona
      Posts
      5,394
      Country Flag: United States
      Quote Originally Posted by trapin
      What is the advice of the membership on this board?
      The best advice I can provide is:
      "Don't be afraid to ask for help"

      If you can get some members who are experienced painters to come by and provide advice and assistance, then the color choice may become readily apparent.
      ________________
      Steve Chryssos

    3. #3
      Join Date
      Mar 2004
      Location
      Mid-Michigan
      Posts
      2,764
      Country Flag: United States
      Tony,
      The question you need to ask is what do YOU want? Who are you building the car for? The guy down the road? Popular Hot Rodding? Street Thunder? Don't do this because you think someone else won't care for it and don't shy away from a color because a magazine might not like it. This is your car, build as you see it...
      And, like Steve says, if you can get some help it makes things a little easier. I am NOT a pro painter but I have some experience and I'm not that far away...
      Mark
      Mark:
      "Bad Ast" Astro Van. Just because I did it... Doesn't mean it's possible...
      This my Bad Ast thread...
      https://www.pro-touring.com/showthre...roject-Faze-II
      This is my Fotki album...
      http://astroracer.fotki.com/

    4. #4
      Join Date
      Feb 2003
      Location
      St. Louis, Missouri
      Posts
      987
      Country Flag: United States
      You must've stayed at a Holiday Inn Express last night. As someone that has painted since I was 15, I would ask you to reconsider and this is why. Although everyone can do it, it does take skill and a TON of practice to get it correct. It's like playing the guitar, some folks can pick it up and begin playing, others take years. I've tought a bunch of people to spray and I still haven't had a "prodigy" that could get the car correct the first time. I admire your tenacity, but please know when to draw the line. If you are dead set on doing it yourself, please practice in the mean time. Make friends with some painters and have them show you the basics. I would hate for you to practice on a car that you have a bunch of time in.

      With that said, I'll answer your question. If you intend to paint it, it won't take that much more time to mask a second color. You just need to be sure of the materials that you are using which dictate the first color applied and when to mask it off. Oh, and stay away from pearls and metallics for your first time. Please ask questions in the paint and body section, we'd be glad to help. Also, try to keep questions specific and stay away from, "how do I paint a car?" as you will probably get 0 replies. One other thing to note. Painters can be a very ecletic bunch, which means everyone will have their own way of doing things and they will tell you about it and swear it's the only way, so, to be fair to yourself, talk with more than one to get a varitey of answers.

    5. #5
      Join Date
      Aug 2004
      Location
      Bedford TX
      Posts
      634
      Your website and all the info on it is what brought me to this site and everything youve done so far has been top notch!! Painting is a different story. Practice Practice Practice like happyfun said and im sure youll be fine.. Oh and throw caution to the wind that two tone sounds kick butt, now you just got to think of some cool design to seperate it!! Good luck, cant wait to see what happens.
      Justin, 68 Camaro Update:5 speed is in and neighbors are pissed!

    6. #6
      Join Date
      Jul 2003
      Location
      Anaheim Hills, CA
      Posts
      11,967
      Country Flag: United States
      Well PHR doesn't ignore black cars but most other mags do. Mostly because few people know how to shoot a black car. Heck, there have been several black cars on the cover and Super Chevy did a feature on a black 1st gen recently.

      So don't fear the black.. well except for keeping it clean

      As for painting.. even a mediocer squirt job can be fixed by a good color sanding and buffing.. Just lay it on thick and put enough clear on and you can colorsand out all your "oops's"
      "A ship in port is safe, but that's not what ships are built for."

      1968 Track Rat Camaro:
      https://www.youtube.com/watch?v=SGHJ5c1yLIo&t=2s

      1971 Chevelle Wagon with a few mods:
      https://www.youtube.com/watch?v=WBVPR3sRgyU

    7. #7
      Join Date
      Feb 2003
      Location
      St. Louis, Missouri
      Posts
      987
      Country Flag: United States
      **Happyfunballs, winces at Steve's painting comments and drops to the floor limp as a noodle, picks himself up, reads it again then falls flat on his face.**












      J/K Steve

    8. #8
      Join Date
      Jul 2001
      Location
      Detroit, Michigan
      Posts
      6,854
      Country Flag: United States
      You must've stayed at a Holiday Inn Express last night.
      Ya got me there.

      You mention staying away from pearls and metallics...why? Is there a method to painting them that differs from solids?

      I'm not worried about spraying black. Actually, it would make the job a whole lot easier bacause I could paint the car in pieces. And it would be a little cheaper too. I can get the car straight. My Dad is a great body man. And he's retired now, so he's got a lot of time on his hands. This isn't necessarily a question about painting cars...I just want to see what people think and I hold the opinions of the members on this board in very high regard.

      Mark....whereabouts in Michigan are you? I do have one local guy I can ask for advice on the project (he posts here as ZL1) but I know he has a lot on his plate.
      1968 Pro-Touring Camaro LS1

      Project: Next Year
      - Start date; June '01
      - Completion; Sometime next year or the year after.....

    9. #9
      Join Date
      Mar 2004
      Location
      Mid-Michigan
      Posts
      2,764
      Country Flag: United States
      Quote Originally Posted by trapin

      Mark....whereabouts in Michigan are you? I do have one local guy I can ask for advice on the project (he posts here as ZL1) but I know he has a lot on his plate.
      I live s.w. of Flint and work in Troy on "Big Beaver" Rd.
      Mark:
      "Bad Ast" Astro Van. Just because I did it... Doesn't mean it's possible...
      This my Bad Ast thread...
      https://www.pro-touring.com/showthre...roject-Faze-II
      This is my Fotki album...
      http://astroracer.fotki.com/

    10. #10
      Join Date
      Feb 2003
      Location
      St. Louis, Missouri
      Posts
      987
      Country Flag: United States
      Trapin, speaking for myself, I spray metallics and pearls with a different technique than solids. There is a method to making sure the metallics are even and not "tiger striped" or "mottled".

    11. #11
      Join Date
      Jun 2002
      Location
      Benicia, CA
      Posts
      1,433
      Country Flag: United States

      Would kill me...

      I did custom body and paint in my 20's for a brief period, hardest work I have ever done. The bodywork was too much labor, the painting was fun but getting it to look right was killing me (candy colors with candy stripes for show). I have since learned that I can do practically anything else on my machines, but body and paint will be paid for. It will save me tons of time and stress, of course the cash outlay is prohibitive at times. Just my 2 cents...

      If you do paint the vehicle yourself, and black or another dark color is the choice, work your butt off getting the panels straight because any flaws will show easily from 25-50 feet. I have seen pics of cars on this site that are really awesome but the bodywork is lacking a tad. I am a perfectionist and expect to see doors hung properly, hoods and deck lids fitting as square and lined up as possible, etc. Good luck and study a lot before you start painting. Maybe you could spend a little time with a pro to see how they apply spray and work the gun? Careful attention to mixing, settling, and drying times is a must for the best results.
      Jeff
      1971 RS Camaro: PAINKILLER

    12. #12
      Join Date
      Nov 2003
      Location
      Maine
      Posts
      1,076

      painting

      i too spray metallics a tad different then solids, one of the keys to base coat is to apply it in light coats, achieve full coverage over 2-3 coats, do not get coverage on first coat, no matter if its black or not, you do not want orange peel in the base coat, apply light coats, it will darken tremendously while its flash drying, once even covered, apply your clear, and do not just apply lots of it to sand out, spend a little money on a good spray gun, cause yeah you can sand a bag hangar down and buff it, but 9 out of 10 times it looks like a wave in the panel, anyways let the questions fly we will do the best we can to help
      jake

    13. #13
      Join Date
      Jul 2001
      Location
      Detroit, Michigan
      Posts
      6,854
      Country Flag: United States
      Thanks Jake...I'll save the questions for the 'Body And Paint' section.

      I probably should have mentioned that I have been studying this for about 8 months now. I have several technical videos and miscellaneous articles on the subject that I've reviewed and saved. I have to think if you're someone who is mechanically inclined with good motor skills (which I am) than it should not be too hard to pick up.

      Trapin, speaking for myself, I spray metallics and pearls with a different technique than solids. There is a method to making sure the metallics are even and not "tiger striped" or "mottled".
      Happy....I will inquire about this in the 'Body And Paint' section. Thanks.
      1968 Pro-Touring Camaro LS1

      Project: Next Year
      - Start date; June '01
      - Completion; Sometime next year or the year after.....

    14. #14
      Join Date
      Jan 2003
      Location
      Arizona
      Posts
      5,394
      Country Flag: United States
      Sorry. I didn't understand the question. The correct answer is:

      Black & Blue
      ________________
      Steve Chryssos

    15. #15
      Join Date
      Aug 2003
      Location
      Orlando, FL
      Posts
      8,745
      [QUOTE=Happyfunballs] I've tought a bunch of people to spray and I still haven't had a "prodigy" that could get the car correct the first time. [QUOTE]

      Uhumph, Clears throat! I have one!

      But Trap, the viper blue will be a bit tricky. Your welcome to call, or I am sure Jake would take your call. One of us will talk you thorugh it.

    16. #16
      Join Date
      Jul 2003
      Location
      Anaheim Hills, CA
      Posts
      11,967
      Country Flag: United States
      Quote Originally Posted by Happyfunballs
      **Happyfunballs, winces at Steve's painting comments and drops to the floor limp as a noodle, picks himself up, reads it again then falls flat on his face.**

      J/K Steve
      Well it is true :p .. Ive seen "ehh" paint jobs make pretty nice by a competent colorsander/buffer..

      Keep in mind that I am NOT a painter.. just a copy chimp that has been around a while.. :rolleyes5
      "A ship in port is safe, but that's not what ships are built for."

      1968 Track Rat Camaro:
      https://www.youtube.com/watch?v=SGHJ5c1yLIo&t=2s

      1971 Chevelle Wagon with a few mods:
      https://www.youtube.com/watch?v=WBVPR3sRgyU

    17. #17
      Join Date
      Aug 2004
      Location
      NY
      Posts
      1,070
      Why does everybody think body and paint is cake walk? If this is your first car it will be average at best. Sorry, but I am just being realistic. You will only haved scratched the surface on your first job. Why not do all the prep and have someone else spray the color? You could even be there to assist as nobody enjoys taping a car off anyway. This way you can say you did eveything except the top coat Can you paint a car on your forst try? of course but will it match the quality of the rest of your ride? I say go for it but not on a car that you want to show. I would be glad to assist you in any way needed but it is tougher than it looks. Plus the cost to get going usually would cost more than throwing a painter $500 bucks to stay late one night and do your car. Good luck!!

    18. #18
      Join Date
      Mar 2005
      Location
      westchester county new york
      Posts
      2,995
      I would say stay away from mettalics or black for your first job .Maybe silver, it just always seem forgiving . The only advice I have is if you can't paint a spare hood or old motorcyle tank to test yourself , don't even think of doing your car. I have painted a lot of helmets and bikes , i have even won trophies for best paint , and i will step back and let my friend paint my car when the time comes.by the time you rent a booth and buy tools and materials it just make sense to let a pro do it.
      Having said that , i really like your color idea , just keep everything swoopy and nice , no wiggles or angles. the farther away the roll of tape in your hand is from where the tape touches the car , the smoother it will be .you can tint the windows and the whole greenhouse will look smaller and swoopier.
      ps sometimes a body shop will give you old cans of basecoat you can practice with ,

    19. #19
      Join Date
      Jan 2003
      Location
      Arizona
      Posts
      5,394
      Country Flag: United States
      Quote Originally Posted by BRIAN
      Why does everybody think body and paint is cake walk? If this is your first car it will be average at best.
      I would gladly risk f#^in up my car to avoid paint jail again. I applaud Tony for trying--even if he is making a mistake. Nothing sux more than watching your body shop sneak insurance job after insurance job ahead of your pride & joy.
      In the time it would take to run his car thru the average body shop, Tony can paint, strip and repaint his car six times. How's that for practice? And there's nothing saying that the shop will get it right either. At least Tony will have no-one to blame but himself. And he doesn't have to worry about his money and property being held as ransom.

      Wow! Can you tell I have a resentment?
      ________________
      Steve Chryssos

    20. #20
      Join Date
      Apr 2004
      Location
      OKC, OK
      Posts
      3,739
      Country Flag: United States
      I say go for it but make sure to practice on a sample pieces first. So what if you screw it up. It is just paint and you can sand it off and do it again. There is no way I can afford $8K-$12K to send my car out to have it painted to the level I want it. If I had that much in my paint, I would probably never drive it being to afraid to scratch it.If it gets scratched, I don't feel near as bad as if I spent 2 or 3 times as much and know I got to take it back and spend more.

      If you don't already have the equipment, it is definitley going to cost more than just paint. What ever the paint is going to cost, you can probably double the material bill for all the equipment you need or use. There is no need to run out and buy the most expensive stuff either. Find something middle of the road that most people like.

      Take your time, spray a few test panels, and when you feel comfortable, then paint the car. You will have a great sense of accomplishment with a job well done.

      Mike
      Mike Redpath
      Musclerodz & Customz
      405-288-0189
      pro-touring parts specialists
      Musclerodz.com

      facebook page
      http://www.facebook.com/#!/pages/Mus...73054649402015
      instagram
      Musclerodz

    Page 1 of 2 1 2 LastLast



    Advertise on Pro-Touring.com