Results 1 to 20 of 38
Thread: Help with avatar
-
08-25-2004 #1
Registered User
- Join Date
- Nov 2003
- Location
- Dallas, TX
- Posts
- 54
Help with avatar
Hey guys, could you also assist me in getting an avatar?
I've attached two images. Your choice of which ever is easier
Thanks!
Jason
Phattires68 aka Jason
68 Camaro Convertible 406 w/ tremec 5spd, Martz front and still working on the rear
-
08-25-2004 #2
Registered User
- Join Date
- Nov 2003
- Location
- Dallas, TX
- Posts
- 54
opps... heres the second shot...
...
Thanks,
JasonPhattires68 aka Jason
68 Camaro Convertible 406 w/ tremec 5spd, Martz front and still working on the rear
08-30-2004 #3
Registered User
- Join Date
- Nov 2003
- Location
- Dallas, TX
- Posts
- 54
bump...
bump...
Phattires68 aka Jason
68 Camaro Convertible 406 w/ tremec 5spd, Martz front and still working on the rear
08-30-2004 #4
-ɹoʇɐɹǝpoW-
- Join Date
- Jul 2002
- Location
- Mesquite, TX
- Posts
- 4,941
I'll work on it when I get home.
What part of Dallas?
08-30-2004 #5
Registered User
- Join Date
- Nov 2003
- Location
- Dallas, TX
- Posts
- 54
Right next to White Rock Lake
I'm one mile from it on the west side. There's a small strip of ghetto that I can afford. Thanks for your help!!
Phattires68 aka Jason
68 Camaro Convertible 406 w/ tremec 5spd, Martz front and still working on the rear
08-30-2004 #6
-Moderator-
- Join Date
- Nov 2001
- Location
- Sacramento Ca
- Posts
- 6,827
eesh. got any higher res pics? or bigger ones? as soon as i shrink it down it gets real bad.
an exampleTony Langlois
1966 Corvair Monza
08-31-2004 #7
Registered User
- Join Date
- Nov 2003
- Location
- Dallas, TX
- Posts
- 54
That looks great...
Hey Tony that looks great.
I do really need some better pic's... These were taken last fall (I think) when it was still running. If I took a picuture of it now, it would look more like an autopsy... Every time I save some $$$ to put it back on the streets... well, life seems to happen. Due to a brief bought of insanity, I was going to sell it then. Thank the Lord no one took it from me. It's not for sale any more. I've had the crate since High School. Heres a few more shots of it.
http://www.generich.com/camaro/Phattires68 aka Jason
68 Camaro Convertible 406 w/ tremec 5spd, Martz front and still working on the rear
08-31-2004 #8
Registered User
- Join Date
- Jul 2002
- Location
- Muskegon, MI
- Posts
- 4,494
do you have one that you want yet? if not I can make one
Adam_______Offical Car Name "ILLUSION"
383 Stroker, Stock cast heads, T-56 tranny, 4.11 gears, 2002 T/A dash, 4th gen interior including seatbelts, power lumbar seats, 18" Budnik Wheels, Hydraboost, QA1 shocks, DC Controller, Power steering conversion, fuel cell, unique exhaust set up........
ILLUSION Website-----------Old Website--------------My Car on Lateral-g.net----------- Need something designed?-AdFabDesign
08-31-2004 #9
Registered User
- Join Date
- Jul 2002
- Location
- Muskegon, MI
- Posts
- 4,494
Ok here is one I tried real quick. Mabey 2 minutes. I can add more cars if you want.
---Deleted test avatar to save room--Adam_______Offical Car Name "ILLUSION"
383 Stroker, Stock cast heads, T-56 tranny, 4.11 gears, 2002 T/A dash, 4th gen interior including seatbelts, power lumbar seats, 18" Budnik Wheels, Hydraboost, QA1 shocks, DC Controller, Power steering conversion, fuel cell, unique exhaust set up........
ILLUSION Website-----------Old Website--------------My Car on Lateral-g.net----------- Need something designed?-AdFabDesign
08-31-2004 #10
Registered User
- Join Date
- Jul 2002
- Location
- Muskegon, MI
- Posts
- 4,494
Here is the 2nd one I made. Your sons with the thumbs up is my favorite pic!!
Adam_______Offical Car Name "ILLUSION"
383 Stroker, Stock cast heads, T-56 tranny, 4.11 gears, 2002 T/A dash, 4th gen interior including seatbelts, power lumbar seats, 18" Budnik Wheels, Hydraboost, QA1 shocks, DC Controller, Power steering conversion, fuel cell, unique exhaust set up........
ILLUSION Website-----------Old Website--------------My Car on Lateral-g.net----------- Need something designed?-AdFabDesign
08-31-2004 #11
Registered User
- Join Date
- Jul 2002
- Location
- Muskegon, MI
- Posts
- 4,494
test 3 good enough for now. This has all 4 pics.
--deteted test avatar to save room---Adam_______Offical Car Name "ILLUSION"
383 Stroker, Stock cast heads, T-56 tranny, 4.11 gears, 2002 T/A dash, 4th gen interior including seatbelts, power lumbar seats, 18" Budnik Wheels, Hydraboost, QA1 shocks, DC Controller, Power steering conversion, fuel cell, unique exhaust set up........
ILLUSION Website-----------Old Website--------------My Car on Lateral-g.net----------- Need something designed?-AdFabDesign
08-31-2004 #12
Registered User
- Join Date
- Nov 2003
- Location
- Dallas, TX
- Posts
- 54
Great! thanks
Derek, Tony, Adam,
Thanks gents,
Unfortunately those two young copilots are my nephews. They are true gear-heads though. The older one has down right scary skills with his go cart!
My wife and I just had our first child, a beautiful little girl. Shes 2 months old. Never thought it could be so good!!!
Thanks again for the assistance!Phattires68 aka Jason
68 Camaro Convertible 406 w/ tremec 5spd, Martz front and still working on the rear
08-31-2004 #13
Registered User
- Join Date
- Jul 2002
- Location
- Muskegon, MI
- Posts
- 4,494
Congrats about your daughter!!!!!! Just think sometime in the future she could be in your car giving the thumbs up.
Adam_______Offical Car Name "ILLUSION"
383 Stroker, Stock cast heads, T-56 tranny, 4.11 gears, 2002 T/A dash, 4th gen interior including seatbelts, power lumbar seats, 18" Budnik Wheels, Hydraboost, QA1 shocks, DC Controller, Power steering conversion, fuel cell, unique exhaust set up........
ILLUSION Website-----------Old Website--------------My Car on Lateral-g.net----------- Need something designed?-AdFabDesign
08-31-2004 #14
Registered User
- Join Date
- Nov 2003
- Location
- Dallas, TX
- Posts
- 54
Thanks Adam I can't wait to drive her around!
At the verge of sounding like a total numbscull, how do I get the car car pic you resized as my avatar?
I've saved it to my hard drive and saved it on the board in my profile picture. But, under the edit avatar, it tells me I have no No Avatar Specified - The only options available in this section is one radio button that says, "do not use and avatar" and will not allow me to unclick it...
WTF am I doing wrong???
On another note here's a shot of my little Gracie...Phattires68 aka Jason
68 Camaro Convertible 406 w/ tremec 5spd, Martz front and still working on the rear
08-31-2004 #15
Registered User
- Join Date
- Jul 2002
- Location
- Muskegon, MI
- Posts
- 4,494
She looks sooo cute and happy!
Now for the avatar. If you saved it to the board in your profile then right click on the pic and go to properties, then copy the address. Copy that text and paste it into your avatar. ----or----
Even easier you can just right click on one of the avatars I made, go to properties, then copy the address. Let me know which one you get working.Adam_______Offical Car Name "ILLUSION"
383 Stroker, Stock cast heads, T-56 tranny, 4.11 gears, 2002 T/A dash, 4th gen interior including seatbelts, power lumbar seats, 18" Budnik Wheels, Hydraboost, QA1 shocks, DC Controller, Power steering conversion, fuel cell, unique exhaust set up........
ILLUSION Website-----------Old Website--------------My Car on Lateral-g.net----------- Need something designed?-AdFabDesign
08-31-2004 #16
Registered User
- Join Date
- Nov 2003
- Location
- Dallas, TX
- Posts
- 54
I've got it in the sig and that's good enough.
I think something in my settings got messed up (classic answer of the uneducated...) // really //. In the edit avatar, there is no way to unselect the one and only radio button in it. The pic in the signature is fine. Just want people to be able to see my ride. There are posers everywhere and putting a photo up gives a little more credibility... I'll link to my website when I make some progress on getting it running again. Ya know, the Dallas Summer and top down cruising in a black vinyl interior makes for a great torture device so I haven't missed it too much. Now the weather getting more reasonable and I'm itching for a cruise.
Hey Adam, just wanted to give you a quick shout for your car and your dedication to the board. You put a great deal of yourself into both and it shows. You have a lot going for you and I'm glad you share it.
If you are ever in Big D, look me up!Phattires68 aka Jason
68 Camaro Convertible 406 w/ tremec 5spd, Martz front and still working on the rear
08-31-2004 #17
-Moderator-
- Join Date
- Nov 2001
- Location
- Sacramento Ca
- Posts
- 6,827
In the edit avatar, there is no way to unselect the one and only radio button in it.
you mean "use custom avatar"? or "do not use avatar"? let me know.Tony Langlois
1966 Corvair Monza
08-31-2004 #18
Registered User
- Join Date
- Nov 2003
- Location
- Dallas, TX
- Posts
- 54
This is what I see:
Hope you can see it... I had to reduce it.
Phattires68 aka Jason
68 Camaro Convertible 406 w/ tremec 5spd, Martz front and still working on the rear
08-31-2004 #19
Registered User
- Join Date
- Jul 2002
- Location
- Muskegon, MI
- Posts
- 4,494
WOW thanks a lot!, that really means more to me than you realize! I don't have any problem helping anyone whenever I can.Hey Adam, just wanted to give you a quick shout for your car and your dedication to the board. You put a great deal of yourself into both and it shows. You have a lot going for you and I'm glad you share it
Glad to see you got the avatar working. :icon996:Adam_______Offical Car Name "ILLUSION"
383 Stroker, Stock cast heads, T-56 tranny, 4.11 gears, 2002 T/A dash, 4th gen interior including seatbelts, power lumbar seats, 18" Budnik Wheels, Hydraboost, QA1 shocks, DC Controller, Power steering conversion, fuel cell, unique exhaust set up........
ILLUSION Website-----------Old Website--------------My Car on Lateral-g.net----------- Need something designed?-AdFabDesign
08-31-2004 #20
Pro-Touring Veteran
- Join Date
- Jun 2002
- Location
- Long Island, NY
- Posts
- 11,320
Well, now you have A HUGE avatar. There is something wrong with the .gif you are trying to load, I tried to link it as your avatar and it didn't work. So then I just tried using a regular pic, but apparently I forgot to resize it, and for some reason I overrode the 80x80 pixel requirement. Hmmmm. I would save the .gif to your hard drive and then upload it from there. Go to you USER CP, click edit avatar, click use custom avatar and upload it from your hard drive.
Reply With Quote
