Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Results 1 to 7 of 7
    1. #1
      Join Date
      Aug 2004
      Location
      Holmes Hollow, Ontario Canada
      Posts
      991

      fuel pump for lt1

      I'm considering dropping in an LT1. Before you ask, I've searched the threads for this and see that its a bolt in affair and every body is concerned with optispark but the guys who actually have the engine. I just can't find info on throttle and fuel pump. Its low milage, and cheap with tranny, computer and harness and for a pitance more another guy has a supercharger. The water pump has been replaced and the optispark replaced with factory parts. And by cheap I mean $2000 for everything Canadian.
      So the question is do I have to run a pump in the tank or can I run a pump inline and use the original line as a return? What else would I need to take care of?
      thanks guys

      ____________________________________________
      Scott


    2. #2
      Join Date
      Aug 2004
      Location
      Jacksonville, FL
      Posts
      1,666
      Country Flag: United States
      For the fuel pump, you will be fine running an MSD 2225 ext pump. An internal tank pump isn't required but it is nicer. For fuel lines, the easy way to do it is to sump your stock tank and just run 3/8 for supply and return lines. For the throttle cable Lokar has an TPI/LT1 part that is 24 inches long that works well, I used a 6 cylinder camaro/nova gas pedal and everything works great.

      What are you using for wiring? Consider the painless or street and performance ones (I have the painless one). BTW, what year LT1 is it? The 92/93's are different than the rest. If it has a new opti, don't be concerned, just don't drive through deep water or power wash your motor. If you have anymore questions, just post them up. There are several of us here that have LT's. Good luck with the swap!
      Chris
      1968 Chevy Camaro SS
      LT4 (coming)/T56 DSE suspension

      1969 Oldsmobile Cutlass S convertible (442 Clone)
      LS3/4L70e, DSE suspension


    3. #3
      Join Date
      Aug 2004
      Location
      Holmes Hollow, Ontario Canada
      Posts
      991
      Its a 96. I haven't decided if I'm going to do it or not just yet but it is really tempting. I wanted to know what I would be getting into before I did the swap. The wiring harness and original computer were going to have to be used and I forgot that that was going to be an issue. How difficult would it be to splice in the new to the old? Do I have to sump it? I have a whole bunch of stupid questions. Thanks so far.
      ____________________________________________
      Scott

    4. #4
      Join Date
      Dec 2007
      Location
      Vancouver, Wa
      Posts
      46
      I also have a 96 LT1 in my 67 Camaro, with the t56 trany. Great motor but I find myself wishing I had just saved up the extra money and went with an LS. There is so many parts and bolt ons for the LS but the Lt's ??? nobody really makes stuff for them anymore. And it's impossible to put on a roots style blower on an LT. Granted not quite impossible, but you end up switching the opti spark witha cam timer and going to coil over plug, in wich case you might as well as started with an LS to begin with..... Also the opti spark has a tendency to detonate at high RPM's 8000+, no bueano.... But alas... like a mangy puppy i love my LT1, it starts no problem, runs flawlessly, gets 28mpg on the freeway!!!, and you can build them, it's just not cost effective...
      Street and preformance wireing harness was awesome! Really good resource.
      I also tried to splice the old wireing to the newish computer, after two weeks with wireing diagrams and a fluke meter, then when I had it figured out, i needed to add three feet of wire to make it fit in the cab. Save your time and just buy a prebuilt harness to your specs from S&P, mine was around 650? I think, it's been a while.
      I went with the Ricks Stainless fuel tank with an inboard pump. works like a charm. Before that I had an inline pump, 160 bones, and it would cavitate at full throttle.

      Street and preformance
      http://www.hotrodlane.cc/

      Good luck
      Tommy

    5. #5
      Join Date
      Apr 2008
      Location
      Newark, OH, / Concord, NC
      Posts
      497
      Congratulations on daring to be different. I don't have any knowledge on your swap that I can share but the LT1s are awesome engines, I have had a 1996 Impala SS since new and it has been great, my digital odometer stopped showing at about 50,000 mi and would blink on occasionally, the last time I saw it it was reading over 125,000 mi,: last night it came on and and I was shocked to see that it had over 252,000 miles on it. The car still runs great and uses no oil, and that's with a pure synthetic oil.

      Dale

    6. #6
      Join Date
      Apr 2008
      Location
      Newark, OH, / Concord, NC
      Posts
      497
      Quote Originally Posted by arue333 View Post
      I also have a 96 LT1 in my 67 Camaro, with the t56 trany. Great motor but I find myself wishing I had just saved up the extra money and went with an LS. There is so many parts and bolt ons for the LS but the Lt's ??? nobody really makes stuff for them anymore. And it's impossible to put on a roots style blower on an LT. Granted not quite impossible, but you end up switching the opti spark witha cam timer and going to coil over plug, in wich case you might as well as started with an LS to begin with..... Also the opti spark has a tendency to detonate at high RPM's 8000+, no bueano.... But alas... like a mangy puppy i love my LT1, it starts no problem, runs flawlessly, gets 28mpg on the freeway!!!, and you can build them, it's just not cost effective...
      Street and preformance wireing harness was awesome! Really good resource.
      I also tried to splice the old wireing to the newish computer, after two weeks with wireing diagrams and a fluke meter, then when I had it figured out, i needed to add three feet of wire to make it fit in the cab. Save your time and just buy a prebuilt harness to your specs from S&P, mine was around 650? I think, it's been a while.
      I went with the Ricks Stainless fuel tank with an inboard pump. works like a charm. Before that I had an inline pump, 160 bones, and it would cavitate at full throttle.

      Street and preformance
      http://www.hotrodlane.cc/

      Good luck
      Tommy

      If it isn't already available Dart is going to make a block, and Summit sells some good Trick Flow heads for the LT1. If you install an LS in your car you will still be faced with the same choices on the fuel and wireing systems. $2000 is a good deal on this combo (especially Canadian) and I'm sure that is why you are considering it, add the hot rod parts as you can afford them. This engine with a few cheap hi-po parts and the right back gears and tires should run high 12s and get the mileage that Tommy talked about.

      Dale

    7. #7
      Join Date
      Dec 2005
      Posts
      60
      An external pump will work just fine as long as the tank is sumped as 130fe said. My original plan was to have a dual pump setup with a surge tank but ended up with a Rick's tank with an internal pump.

      I did some research on aftermarket wiring harnesses and decided they were too spendy for me. I modified the factory harness to suit my needs. This was quite time consuming so you need to make this decision for yourself.
      67 Camaro, 96 LT1, 4L60E




    Advertise on Pro-Touring.com