Results 1 to 20 of 587
Threaded View
-
10-22-2010 #10
Registered User
- Join Date
- Aug 2010
- Location
- grover beach CA
- Posts
- 64
swaybar ?
the front sway? thats a bunch of speedway engineering pieces and too much of my time. i would pay the $800 for the dse bar if i had to do it over. cost about $400 to build and it took a TON of time for the pillow block mounts, delrin bushings (that i need to remake) and to get the damn arms bent correctly. i should have also spent the money on the ridetech heims which would have allowed for a little more room.
its 38.25" long, 1.5" .120 wall, 49 spline. they wouldnt sell me the 48 spline since it was too close to the dse bar, and they supply them to dse.
I am interested in how you made those pillow blocks and delrin bushings, I plan on doing a simular setup with cheap used nascar parts and some good old fabrication. Your frame is very impresive , I went the tubular backhalf route with a overkill rollcage but yours is much more practical.
-
Reply With Quote
