Results 1 to 7 of 7
Thread: Need Oil Pan help!!!
-
10-12-2009 #1
Registered User
- Join Date
- Jun 2009
- Location
- Sunbury, PA
- Posts
- 58
Need Oil Pan help!!!
I stuck a 454 with a 1 piece rear main seal in my 67 velle. I used the GM Performance Parts oil pan for this swap sold by summit. The drain plug, on the pan is on the back of the pan and backs out into the bellhousing... Who makes an oil pan for under $300 that will fit the car and motor.
Thanks
Nick
-
10-12-2009 #2
Registered User
- Join Date
- Nov 2006
- Location
- Ma.
- Posts
- 5,560
Deleted
Wayne
Car FINALLY home !!!!!! lol
Project FNQUIK https://www.pro-touring.com/showthre...ghlight=FNQUIK
10-12-2009 #3
Registered User
- Join Date
- Dec 2006
- Location
- Edmonton, AB, Canada
- Posts
- 311
Check out Canton's stuff... www.cantonracingproducts.com
Colin
1950 Pontiac 12.82@105
1999 GTP
10-12-2009 #4
Registered User
- Join Date
- Jun 2009
- Location
- Sunbury, PA
- Posts
- 58
Thanks I was hoping to keep it under $300 but I guess I won't... Thanks again...
10-12-2009 #5
Registered User
- Join Date
- Jun 2007
- Location
- Farmingville, New York
- Posts
- 70
You could weld a threaded bung onto the pan and put the drain anywhere you want it. Even if you can't do it yourself, I'm sure you'll be well under $300 at any shop.
10-13-2009 #6
Registered User
- Join Date
- Jul 2005
- Location
- Eastern Virginia
- Posts
- 3,965
X2, that is what I was thinking. Just add a drain port where you want it & leave the other or weld it shut.
Originally Posted by Fast01
Scot
86 Monte SS
10-13-2009 #7
Registered User
- Join Date
- Jun 2009
- Location
- Sunbury, PA
- Posts
- 58
Thanks! I just have to find a shop to move it for me...
Reply With Quote
