Results 1 to 7 of 7
-
10-07-2009 #1
Registered User
- Join Date
- Oct 2004
- Posts
- 2,624
3rd Gen F-body Wheel on a 1st Gen?
Is it possible to install, or would an adapter be required? I want to put a 3rd Gen wheel on my '68. I really like the design and size, plus junkyard hunting can be fun.
Red Forman: "The Mustang's front end is problematic; get yourself a Firebird."
-
10-07-2009 #2
Registered User
- Join Date
- Dec 2006
- Location
- So Cal
- Posts
- 920
The bolt pattern (5 on 4.75") never changed on the F-body cars from '67 all the way to 2002.
As long as the backspacing and wheel width will work (do some measuring) you're good to go.Bart F.
'64 Tempest - LS3/4L70E - Grandma's Poor-Touring car
'64 GTO - 455 HO/TH400 - Ex-bracket racer, street bruiser'02 WS6 convert - LS1/4L60E - Pure stock, pure pleasure
10-07-2009 #3
Registered User
- Join Date
- Aug 2004
- Location
- CT
- Posts
- 823
I think he's asking about the steering wheel. right?
Originally Posted by b-man
10-07-2009 #4
Registered User
- Join Date
- Dec 2006
- Location
- So Cal
- Posts
- 920
Right, interior forum!!
My mistake.
10-07-2009 #5
Registered User
- Join Date
- Oct 2004
- Posts
- 2,624
Shoot, I was excited for a minute there! Anybody - steering wheel swap possible?
Red Forman: "The Mustang's front end is problematic; get yourself a Firebird."
10-07-2009 #6
Registered User
- Join Date
- Aug 2004
- Location
- CT
- Posts
- 823
Im not really going to be much help but.. Im planning on putting a 04 GTO wheel and column into my 69. A adapter needs to made at the rag joint. Originally Posted by 68Formula
10-07-2009 #7
Registered User
- Join Date
- Oct 2004
- Posts
- 2,624
Good reminder. I should clarify that I don't want to change the column, just the wheel.
Red Forman: "The Mustang's front end is problematic; get yourself a Firebird."
Reply With Quote
