Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register




    Page 11 of 27 FirstFirst ... 6 7 8 9 10 11 12 13 14 15 16 21 ... LastLast
    Results 201 to 220 of 541

    Hybrid View

    1. #1
      Join Date
      Nov 2005
      Location
      Little Rock, Arkansas
      Posts
      945
      Leigh, why the flexible dipstick VS the stock one?



    2. #2
      Join Date
      Feb 2005
      Location
      Sydney, Australia
      Posts
      1,797
      Country Flag: Australia
      Canton pan had the plug already in the sump for their dipstick, I wasn't sure about clearances with the windage tray/billet 4 bolt main caps ( I did have to space the windage tray a little) and the headers vs the stock dipstick...and I really never cared too much for the separate guide piece sitting down in the block that is just located by it's position between the dipstick tube and the windage tray.
      .....plus
      lol...doesn't look bad, either.....
      Regards,
      Leigh

      Sydney, Australia
      1971 Firebird 455

      https://www.pro-touring.com/showthre...Project/page27

    3. #3
      Join Date
      Nov 2005
      Location
      Little Rock, Arkansas
      Posts
      945
      As you know, I'll be using the same pan and I already have a flex tube type dipstick tube for my 4L80e so I didn't want to use another one if I didn't have to. It looks like I'll have to, huh? Maybe put an "O" and a "T" on them so I won't get confused! LOL!

    4. #4
      Join Date
      Feb 2005
      Location
      Sydney, Australia
      Posts
      1,797
      Country Flag: Australia
      I can't imagine filling a trans through one of these....but as a dip stick only they look fine....
      Regards,
      Leigh

      Sydney, Australia
      1971 Firebird 455

      https://www.pro-touring.com/showthre...Project/page27

    5. #5
      Join Date
      Jan 2010
      Location
      Delaware
      Posts
      689
      Thats looking terrific Leigh. I STILL dont have my block back.....sigh. I do have a new and bigger turbo coming though :D Those headers of Ron's look great. What coating did you get on them? Also, any chance you could post over on the Tri-y thread on PY that last pic and maybe a pic from the same spot but lower down level with the pan bottom.....so people can really get a good idea of how they dont come down past the pan?

      I'm hoping to get a set of stainless ones from him. He's going to try to move the tubes forward as much as possible, and they are going to be really short since they make a sharp turn toward the passenger firewall right before the trans. But I love that blue purple look stainless gets when it gets hot........and its going to get HOT with that turbo.....lol
      1973 Trans Am 455 SR block, ported 6x-8 heads, solid cam, Victor intake, 830 CSU carb, aluminum rods, 77mm Garrett turbo and methanol injection. 1064hp at the flywheel@5500 rpm

    6. #6
      Join Date
      Feb 2005
      Location
      Sydney, Australia
      Posts
      1,797
      Country Flag: Australia
      I'll dig them out of hiding (in the trunk of the 71) and hang one again and snap a lower pic...they do indeed sit above the pan, which impressed the owner of the red 74 T/A you can see parked out the front of my house in the above pic. The white truck in the drive belongs to my friend who helped with the engine build.
      They both really liked the quality of these headers.
      Regards,
      Leigh

      Sydney, Australia
      1971 Firebird 455

      https://www.pro-touring.com/showthre...Project/page27

    7. #7
      Join Date
      Mar 2007
      Location
      Florida
      Posts
      2,391
      Country Flag: United States
      Looks very nice Leigh! Be sure to use some sealer on the dry sump fitting plugs or they'll weep.

    8. #8
      Join Date
      Jan 2010
      Location
      Delaware
      Posts
      689
      Thanks again Leigh! I'm going to quote what you said here for the PY gang...positive, uninvested observer impressions are good for Ron.
      1973 Trans Am 455 SR block, ported 6x-8 heads, solid cam, Victor intake, 830 CSU carb, aluminum rods, 77mm Garrett turbo and methanol injection. 1064hp at the flywheel@5500 rpm

    9. #9
      Join Date
      Feb 2005
      Location
      Sydney, Australia
      Posts
      1,797
      Country Flag: Australia
      Quote Originally Posted by NOT A TA View Post
      Looks very nice Leigh! Be sure to use some sealer on the dry sump fitting plugs or they'll weep.
      Thanks John, they were just in there temporary to fill the holes and so I could check if there was any issue with the headers....none - tons of room. I'll teflon tape them before I drop the engine in.
      Regards,
      Leigh

      Sydney, Australia
      1971 Firebird 455

      https://www.pro-touring.com/showthre...Project/page27

    10. #10
      Join Date
      Feb 2005
      Location
      Sydney, Australia
      Posts
      1,797
      Country Flag: Australia
      Been doing little bits and pieces till I get another day off.....dug out the Formula aircleaner and made up a blank for the heat stove pipe (not using it). Swapped the LH valve cover around which fixed my clearance issue with the aircleaner.
      So I added a GTO's 455HO decal....cause I like them.... :grin: even though I know Firebirds didn't use them...who cares, not exactly stock here.
      When I bought the aircleaner, they had a separate chrome cover for a few extra $, so I can swap out for a bit of bling if I feel like it.

      Black



      Bling

      Regards,
      Leigh

      Sydney, Australia
      1971 Firebird 455

      https://www.pro-touring.com/showthre...Project/page27

    11. #11
      Join Date
      Sep 2004
      Location
      Orlando, FL
      Posts
      1,086
      Country Flag: United States
      Quote Originally Posted by LeighP View Post
      Been doing little bits and pieces till I get another day off.....dug out the Formula aircleaner and made up a blank for the heat stove pipe (not using it). Swapped the LH valve cover around which fixed my clearance issue with the aircleaner.
      So I added a GTO's 455HO decal....cause I like them.... :grin: even though I know Firebirds didn't use them...who cares, not exactly stock here.
      When I bought the aircleaner, they had a separate chrome cover for a few extra $, so I can swap out for a bit of bling if I feel like it.

      Black



      Bling

      LOVE the Ram Air aircleaner! I want to run one of these on my car eventually... but cast iron grey (to match my block) with a custom billet lid and cf flat stock on the flat inlet extensions. Think anyone would notice a "440 HO" decal? LOL
      SMSgt Ty Ingle, USAF
      "CF71" - Freedom Bird
      Hoodpins.com, Inland Empire Driveline, Billet Accessories Direct, Modo Innovations, AutoRad Radiators, Morris Classic Concepts, Marquez Design, Anvil Auto, Fesler Billet, US Collision (DOOM), AGR Performance, Pro-touringF-body.com, Phoenix Transmission Products, Shiftworks, ACC Carpet, Hedman Hedders, BMR Fabrication, American Autowire, MityMounts, TIN INDIAN Performance, Kauffman Racing Equipment, Pypes, RobbMc Performance, WMC, Holley, NOS, PST

    12. #12
      Join Date
      Feb 2005
      Location
      Sydney, Australia
      Posts
      1,797
      Country Flag: Australia
      Look what turned up in the mail from the US......Clayton Machine Works got their billet pedal and window winder assemblies to me, had to wait a bit, but it was worth it.....mmmm, sweet!!!!

      Accelerator pedal is height adjustable as well...nice!






      Should look good against a black interior.
      Regards,
      Leigh

      Sydney, Australia
      1971 Firebird 455

      https://www.pro-touring.com/showthre...Project/page27

    13. #13
      Join Date
      Nov 2005
      Location
      Little Rock, Arkansas
      Posts
      945
      I'm digging the basic black on the air cleaner. And I see a set of those pedals in my future.

    14. #14
      Join Date
      Jan 2010
      Location
      Delaware
      Posts
      689
      I'm liking it too Chris. I also really like the way you detailed the timing tab and valve covers Leigh. Watching yours come together is making me very itchy to get to mine! lol. I got a new and bigger/better turbo.........sitting here staring at it and wondering if I should start sanding the aluminum to polish it.................
      1973 Trans Am 455 SR block, ported 6x-8 heads, solid cam, Victor intake, 830 CSU carb, aluminum rods, 77mm Garrett turbo and methanol injection. 1064hp at the flywheel@5500 rpm

    15. #15
      Join Date
      Jun 2005
      Location
      Greenwood, SC
      Posts
      2,314
      I thought the clayton gear was vaporware--glad to see they made it to production with them. Very cool pieces.

      Always loved the big engine callouts like that--nice touch, sir!

    16. #16
      Join Date
      Feb 2010
      Location
      CO (orig. NY)
      Posts
      140
      Country Flag: United States
      Those pedals look sweet! Excellent choice there.

    17. #17
      Join Date
      Feb 2005
      Location
      Sydney, Australia
      Posts
      1,797
      Country Flag: Australia
      Thanks guys, yeah it was a bit of a wait for the pedals and winders....I guess there were some production issues, but they are very nice. Clay kept me up to date on what was happening, and nothing was charged till they were sent....so if anyone wants them, I wouldn't feel there'd be any issues.
      Regards,
      Leigh

      Sydney, Australia
      1971 Firebird 455

      https://www.pro-touring.com/showthre...Project/page27

    18. #18
      Join Date
      Aug 2008
      Location
      Charleston, SC
      Posts
      354
      I am continually impressed with your build. You are getting a lot of bang for your buck! That is going to be a sweet ride.

    19. #19
      Join Date
      Feb 2005
      Location
      Sydney, Australia
      Posts
      1,797
      Country Flag: Australia
      Thanks Doug...hope to have the engine and box in the chassis this weekend. Watch for more pics.
      Regards,
      Leigh

      Sydney, Australia
      1971 Firebird 455

      https://www.pro-touring.com/showthre...Project/page27

    20. #20
      Join Date
      Feb 2005
      Location
      Sydney, Australia
      Posts
      1,797
      Country Flag: Australia
      I think a 440HO decal would be very cool....certainly fit the theme of the car.

      Was on nightshift, so the project for this afternoon was to join the engine and gearbox and fit the trans mount.....
      Nice to have a hoist, I was able to put it together myself.



      Found out that apparently, the bolts that hold the trans mount to the box are metric (found this out after screwing in a couple of UNC 3/8" bolts, one of which tore a couple of thread tops off)......who'd have though a TH350 would have metric threads in it? :roll: Easy enough to fix, even if I have to helicoil it, which I think I won't have to....just need the right bolts.
      Regards,
      Leigh

      Sydney, Australia
      1971 Firebird 455

      https://www.pro-touring.com/showthre...Project/page27

    Page 11 of 27 FirstFirst ... 6 7 8 9 10 11 12 13 14 15 16 21 ... LastLast



    Advertise on Pro-Touring.com