Project Lime Time Camaro

[customshop]

We got the car fired up to night. Sound and runs great. I have a few minor vacum line issues but started n the first crank Sweet!!!
I installed the Spal TV / Rear view mirror, Sony in dash DVD player, the 2nd Kinetik battery in the front, AirAid intake and filter, tested the headlight and tail lights, Digital Dakota gauges are working still need to program but all lite up and lookin cool.
rad. over flow and the Scosche wire. Notice the C5 corvette side marker light.
I will see if I can find more info on the headlight. I got them over a year ago for another project and liked them so I ordered a few more sets. so these are from my inventory. I will see what I can find.
I am sitting down and having a screwdriver drink with the Wife I will try and get more done tomorrow. only a few days left.

[customshop]

Here are the first pics of it sitting on the ground. Hope for a test drive tomorrow. if the weather holds out. got the coil cover on AirAid intake filter, UnderCover Innovations made the header cover panel for us. Fits like a glove. also the black fender braces as well. Grant steering wheel installed, Petrol wheels made by TSW. BFGoodrich KDW2 tires. still need a little tire shine to get the dust off them. Used Lokar shifter and boot with the digital read out for the indicator, I also used there pedals in Black as well. Just finished doing the window tint. Just a lite 20% smoked tint. Later

[dropit69]

man that came out really sweet ..nice job on it ..have a good time in vegas !!

[wellis77]

I agree with Darren. This build is great. I really like how your fender mods came out. Great job.

[EvilCamaro]

Looking awesome!

[customshop]

Hello I wanted to share the full build on the Lime Time camaro. I did a rendering and then found a 1968 camaro RS, Got a Cadillac 6.0 liter LQ9 motor and a 4L80E trans, Replaced a TON of rusty sheet metal, did the Engine swap, hooker Headers and Magna Flow exhuast, NOS system for an extra 150 hp., LS1 Weiand intake, Spectra Premium FI fuel tank, Stainless Lines, mild custom int. and a Sony audio / Video system, 4 link rear end, Firestone air bag susp., 4 wheel disc brakes, 18 and 19 Petrol Wheels, BFGoodrich tires, Custom PPG green pearl paint with Charcoal pearl stripes, took its first drive today run like a champ, a few Minor things to finish up and polish up then its off to SEMA on friday morning. We did this complete built in 6 weeks and 4 days. We hope to see you at the shows.
Thanks John Wargo and the crew at The Custom Shop

[Motown 454]

Looks great.

[Mr.VENGEANCE]

a sick looking car.. just to me the wheels kinda let down how good everything else is..

a set of nice Rushforth X rated in gunmetal grey center and lime green lips...


DONE!

[KnightMare]

a sick looking car.. just to me the wheels kinda let down how good everything else is..

a set of nice Rushforth X rated in gunmetal grey center and lime green lips...


DONE!

I agree as well. Great looking car it's just the wheels that throws the look off a lil

[meenaggie]

I like the Airraid intake and filter, clean and simple. I need something similar for a LS2 going in my 68 camaro. Does it use a stock style MAF or can you use GM performance insertion type? Can you please share a part number?

[oestek]

Here's a look at the Camaro at SEMA...

[talbotdd]

I really like the wheels. Are they a BMW wheel? What offset are you running front and rear to get them to tuck like that?

-Dustin

[Motown 454]

Nice job guys that is sweet!

[customshop]

We are back from SEMA. had a great show lots of really cool stuff as always. The show was smaller then last year by alot. Still plenty of bad rides.
We got the Lime Time camaro places by the Car Crazy stage so a good spot at the show. Then sat morning after sema Took it to the salt flats and got a Photo shoot for Muscle Car Power magazine. Prett sweet.
Rims are Petrol wheels by TSW named Throttle.
they are for the BMW you are correct. 18" x 8 front with a 4.75 bs and 19 x 9 with 4.75 bs. I did not mini tube the car in the rear and the front is tight if you want it to lay lower tubular control arms will help as well. Thnx
I will post some pics from the flats soon.

[rickk]

rick k

[customshop]

Here is a couple pics from the Salt Flats Muclse car power did a photo shoot after Sema Sat. morning. These are my pics, there will be much better quality I am sure. Hope you all like them.
Six weeks and 5 days total build time. I have 4 guys working in my shop and we were bustin Hump on this thing. Car went over really good at the show. Thanks for you kind comments also.

[srh3trinity]

I didn't like the concept at first but the execution is great. The color looks good and the details with the stripes look great. Nice job.

[customshop]

Thanks. We are going to the muscle car show in Rosemont next weekend if anyone wants to go. It is at the Donald Stevenson Center. sat and sunday.
http://musclecarandcorvettenationals.blogspot.com/

[Jake616]

Great Job man! Gonna make somebody a fun ride!


http://cgi.ebay.com/ebaymotors/Chevr...fCarsQ5fTrucks