Results 1 to 6 of 6
Thread: C6 Z06axle out dimension
-
09-14-2009 #1
New to Pro-Touring
- Join Date
- Oct 2007
- Location
- sussex new jeresy
- Posts
- 4
C6 Z06axle out dimension
I have 12 bolt with C6 Z06 brakes. I'm installing 9-inch ford housing ends to accomodate kores 3 e-brake setup. I need to know the axle out dimension.
bill67cam
-
09-14-2009 #2
Registered User
- Join Date
- Aug 2004
- Location
- Rustburg, Virginia
- Posts
- 3,436
I thought their ebrake kit backing plate would bolt directly to the 12 bolt. Maybe I'm thinking about the regular C5 brakes.
1970 RS/SS350 139K on the clock:
89 TPI motor w/ 1pc rear seal coupled to a Viper T56 via Mcleod's modular bellhousing w/ hydraulic T/O bearing from the Viper, 12 bolt rear w/ 3.73 gearing, SC&C upper control arms, factory lowers with Delalums, C5 brakes at all four corners, Front Wheels 17x8's with Sumi 255/40/17 and Rear Wheels 17x9's with Sumi 275/40/17.
Brief description of the work done so far can be found here: http://www.nastyz28.com/forum/showthread.php?t=112454
09-14-2009 #3
New to Pro-Touring
- Join Date
- Oct 2007
- Location
- sussex new jeresy
- Posts
- 4
i have a 12 bolt with moser small chevy housing ends with large ford bearings. but tobin prefers the ford housing ends. his 9 inch kit retains my axles and mounts my brakes. i need to know is the axle out the same as stock.
bill67cam
09-14-2009 #4
Registered User
- Join Date
- Dec 2007
- Location
- Carlsbad, Ca
- Posts
- 1,213
call tobin. he had a bunch of specs that i passed on to currie when they built my 12 bolt with 9" ends.
Tim
The WidowMaker: Garage Built 70 Chevelle
Special Thanks To: Rushforth Wheels, MuscleRodz, Kore3 & SC&C
Build Thread Link
09-14-2009 #5
Registered User
- Join Date
- Aug 2004
- Location
- Rustburg, Virginia
- Posts
- 3,436
Ah...very neat.
Originally Posted by bill fadden
1970 RS/SS350 139K on the clock:
89 TPI motor w/ 1pc rear seal coupled to a Viper T56 via Mcleod's modular bellhousing w/ hydraulic T/O bearing from the Viper, 12 bolt rear w/ 3.73 gearing, SC&C upper control arms, factory lowers with Delalums, C5 brakes at all four corners, Front Wheels 17x8's with Sumi 255/40/17 and Rear Wheels 17x9's with Sumi 275/40/17.
Brief description of the work done so far can be found here: http://www.nastyz28.com/forum/showthread.php?t=112454
09-14-2009 #6
Registered User
- Join Date
- Jan 2006
- Location
- Oregon
- Posts
- 1,773
Bill, we usually prefer the Ford ends if you had to choose because any time you can make something "standard", you usually end up coming out ahead in the long run. That said, we have kits for both the standar Ford big-bearing "Torino" or "new style" housing ends and the GM/Ford hybrids you mentioned. Originally Posted by bill fadden
If you're running the true Ford "Torino" housing ends with 2.00 x 3.56 pattern, 2.50" axle offset dimension and 3/8" retainer bolts, then that's all you need to know.
If you're looking at running the GM pattern/Ford big-bearing hybrid housing ends, we have BOP kits that work with those as well, and those have a 2.75" axle offset dimension. Moser, Strange, etc have flush versions of these as well primarily designed for LS1 brake conversions, however our kits are compatible with those ends as well, just minus a spacer that is included with the kit.
Tobin
KORE3It's what I does.
Reply With Quote
